# 2025-02204: FAA Mandates Jet Engine Seal Replacements After In-Flight Failure

2025-02204, Airworthiness Directives; CFM International, S.A. Engines, is a Federal Register rule from Transportation Department, Federal Aviation Administration published 2025-02-04, effective 2025-03-11; PRIA reads it as touching household money (as of 2026-09-22).

- Canonical: https://policyrisk.com/federal-register/2025-02204
- As of: 2026-09-22
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-02204
- Title: Airworthiness Directives; CFM International, S.A. Engines
- Type: Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 90 FR 8889
- Published: 2025-02-04
- Effective: 2025-03-11
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-09-22

## In one line

FAA Mandates Jet Engine Seal Replacements After In-Flight Failure

## Summary

The FAA is making a new rule for certain CFM LEAP-1A and LEAP-1C jet engines because a key seal part failed during a flight. Owners must remove and replace this seal on LEAP-1A engines and can’t install the affected parts on either engine model anymore. This rule starts March 11, 2025, to keep flights safe without causing big costs or delays.

## Abstract

The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) Model LEAP-1A and LEAP-1C engines. This AD was prompted by an investigation of an in-flight shut down event that revealed the aft arm of the high-pressure turbine (HPT) rotor interstage seal had failed. This AD requires removal from service and replacement of the HPT rotor interstage seal for LEAP-1A engines. Since the HPT rotor interstage seal part number is interchangeable between LEAP-1A and LEAP-1C engines, this AD also prohibits installation of these affected parts onto any LEAP-1A or LEAP-1C engine. The FAA is issuing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Mandatory seal removal and replacement: cost, high. If you operate airplanes with CFM LEAP-1A engines that have the affected HPT rotor interstage seal P/N and S/N listed in the CFM service bulletin, you must remove that seal and replace it at the next engine shop visit or before the engine exceeds the listed cyclic threshold (for most LEAP-1A models…
- Ban on installing affected seals: cost, medium. Starting March 11, 2025, you may not install any HPT rotor interstage seal having the P/N and S/N listed in the identified CFM service bulletins into any LEAP-1A or LEAP-1C engine. The prohibition uses the specific P/N/S/N tables in CFM SB LEAP-1A-72-00-0525-01A-930A-D (Issue 002-00) and CFM SB LEA…
- FAA estimated compliance cost to U.S. operators: cost, high. The FAA estimates this AD affects 56 engines on U.S. airplanes. The FAA estimates per-engine compliance cost at $196,020 (12 work-hours at $85/hour = $1,020 labor plus $195,000 parts), for a total estimated cost to U.S. operators of $10,977,120.

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2025-02204 on federalregister.gov](https://www.federalregister.gov/documents/2025/02/04/2025-02204/airworthiness-directives-cfm-international-sa-engines)
- [2025-02204 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-02-04/pdf/2025-02204.pdf)

## Related
- [Previous: 2025-02188, Airworthiness Directives; DAHER AEROSPACE (Type Certificate Previously Held by…](https://policyrisk.com/federal-register/2025-02188)
- [Next: 2025-02208, List of Approved Spent Fuel Storage Casks: Holtec International HI-STORM UMAX C…](https://policyrisk.com/federal-register/2025-02208)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-02204 (as of 2026-09-22).
