# 2025-07275: FAA to Bell 430 owners: Swap those rotors sooner or else!

2025-07275, Airworthiness Directives; Bell Textron Canada Limited Helicopters, is a Federal Register rule from Transportation Department, Federal Aviation Administration published 2025-04-28, effective 2025-05-13; PRIA reads it as touching household money (as of 2026-10-13).

- Canonical: https://policyrisk.com/federal-register/2025-07275
- As of: 2026-10-13
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-07275
- Title: Airworthiness Directives; Bell Textron Canada Limited Helicopters
- Type: Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 90 FR 17547
- Published: 2025-04-28
- Effective: 2025-05-13
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-10-13

## In one line

FAA to Bell 430 owners: Swap those rotors sooner or else!

## Summary

If you own certain Bell Textron Canada Model 430 helicopters, new safety rules are here! The FAA is updating inspections and shortening how long some rotor parts can be used before they must be replaced. These changes start May 13, 2025, and could mean some extra maintenance costs but keep your helicopter flying safe and sound.

## Abstract

The FAA is superseding Airworthiness Directive (AD) 2021-24- 09, which applied to certain Bell Textron Canada Limited Model 430 helicopters. AD 2021-24-09 required a visual inspection of the main rotor (M/R) pitch link clevis (clevis), rod end, and a certain part- numbered universal bearing, performing a purge grease, and performing a magnetic particle inspection of each M/R clevis, and depending on the inspection results, removing or replacing certain parts and performing additional actions. AD 2021-24-09 also required recurring inspections of each M/R clevis and each universal bearing. Since the FAA issued AD 2021-24-09, the manufacturer has reduced the life limits of the affected parts and introduced new M/R pitch link assemblies by re- identifying the M/R pitch link assemblies that were required to be inspected by AD 2021-24-09. This AD requires similar actions as AD 2021-24-09 but reduces the life limits and requires replacing the M/R pitch link assemblies with re-identified part numbered assemblies. These actions are specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Which helicopters are affected: cost, low. This rule applies only to Bell Textron Canada Limited Model 430 helicopters with serial numbers 49001 through 49129 inclusive. The FAA estimates this AD affects 29 helicopters on the U.S. registry.
- Effective date and short compliance deadline: cost, medium. The AD is effective May 13, 2025, and required actions must be completed within 50 hours time-in-service or 60 days, whichever occurs first, after the effective date. The FAA made the rule effective with less than 30 days' notice due to safety risk.
- Required inspections and part-life reductions: cost, medium. You must follow Transport Canada AD CF-2024-40 (incorporated by reference) to review records, perform detailed visual inspections of pitch link tube assemblies, rod ends, universal bearings, and main rotor (M/R) clevises, perform purge grease and magnetic particle inspections (MPI) after each detai…
- FAA cost estimates for compliance: cost, medium. The FAA estimates the rule affects 29 U.S. helicopters and uses a labor rate of $85 per hour. Estimated per-action costs include: record review $22 (.25 hr), detailed inspections $340 (4 hrs) each, MPI $170 (2 hrs), and re-identify $22 (.25 hr). The FAA also lists on-condition parts costs such as r…
- Special flight permits allowed to reach maintenance: benefit, low. You may obtain a special flight permit under 14 CFR 21.197 and 21.199 to fly the helicopter to a maintenance area to perform the AD actions, provided there are no passengers onboard.
- No FAA reporting requirement to manufacturer: benefit, low. Although Transport Canada AD CF-2024-40 specifies submitting certain information to the manufacturer, this FAA AD explicitly does not require operators to submit those reports to the manufacturer.

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2025-07275 on federalregister.gov](https://www.federalregister.gov/documents/2025/04/28/2025-07275/airworthiness-directives-bell-textron-canada-limited-helicopters)
- [2025-07275 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-04-28/pdf/2025-07275.pdf)

## Related
- [Previous: 2025-07274, Airworthiness Directives; Bell Textron Canada Limited Helicopters](https://policyrisk.com/federal-register/2025-07274)
- [Next: 2025-07333, Safety Zone; Underwater Lake Bed HAUX/ROV Survey; Straits of Mackinac, MI](https://policyrisk.com/federal-register/2025-07333)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-07275 (as of 2026-10-13).
