# 2025-09770: FAA Wants Faster Checks for Growing Cracks on Boeing 737s

2025-09770, Airworthiness Directives; The Boeing Company Airplanes, is a Federal Register proposed rule from Transportation Department, Federal Aviation Administration published 2025-05-30, effective The following material was approved for IBR on [DATE 35 DAYS AFTER PUBLICATION OF THE FINAL RULE].; PRIA reads it as touching household money (as of 2026-10-26).

- Canonical: https://policyrisk.com/federal-register/2025-09770
- As of: 2026-10-26
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-09770
- Title: Airworthiness Directives; The Boeing Company Airplanes
- Type: Proposed Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 90 FR 22867
- Published: 2025-05-30
- Effective: The following material was approved for IBR on [DATE 35 DAYS AFTER PUBLICATION OF THE FINAL RULE].
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-10-26

## In one line

FAA Wants Faster Checks for Growing Cracks on Boeing 737s

## Summary

The FAA wants to update safety rules for certain Boeing 737-600 airplanes because cracks in the plane’s skin are growing faster than expected. They’re shortening the time between inspections and making sure repairs are done quicker to keep flights safe. Owners need to act faster and keep checking even after fixes, with comments on the plan due by July 14, 2025.

## Abstract

The FAA proposes to supersede Airworthiness Directive (AD) 2013-08-08, which applies to certain The Boeing Company Model 737-600 series airplanes. AD 2013-08-08 requires repetitive inspections for cracking of the fuselage skin at certain locations at chem-mill steps, and repair if necessary. AD 2013-08-08 also provides optional terminating action for the repetitive inspections. Since the FAA issued AD 2013-08-08, Boeing has reported that the compliance times are not adequate because new fleet data indicates that crack growth is faster and more distributed between tear straps, resulting in longer cracks than originally observed in the test data that prompted AD 2013-08-08. This proposed AD would continue to require the actions in AD 2013-08- 08, at reduced initial compliance times and repetitive intervals for the inspections, and mandate post-modification inspections if the optional modification is accomplished. The FAA is proposing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Shorter inspection intervals for 737-600: cost, high. If you operate Boeing Model 737-600 airplanes, the FAA would shorten the initial compliance times and make inspection intervals more frequent for fuselage skin cracking at chem-mill steps. The rule requires external detailed inspections plus nondestructive inspections (MFEC, MOI, C-scan, or UTPA) a…
- Upfront modification and post-mod inspection costs: cost, high. If you choose the optional terminating modification for the affected area, you must do a pre-mod inspection, perform the modification, and then do required post-modification inspections. The FAA estimates the modification labor at 855 work-hours x $85/hour = $6,840 (parts listed as minimal) and pos…
- Limited U.S. fleet affected; aggregate cost estimate: cost, low. The FAA estimates this proposed AD would affect 6 airplanes of U.S. registry. The FAA estimates the aggregate cost on U.S. operators for one inspection cycle at $19,890 (6 airplanes × $3,315 per airplane).
- Safety action to prevent rapid decompression: benefit, high. The FAA is proposing earlier and more frequent inspections to detect and correct fatigue cracking of fuselage skin at chem-mill step locations on Boeing 737-600 airplanes because such cracking could lead to rapid decompression. The rule’s purpose is to reduce the unsafe condition and require repair…

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2025-09770 on federalregister.gov](https://www.federalregister.gov/documents/2025/05/30/2025-09770/airworthiness-directives-the-boeing-company-airplanes)
- [2025-09770 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-05-30/pdf/2025-09770.pdf)

## Related
- [Previous: 2025-09754, Rescinding Requirements Regarding Geodetic Markers](https://policyrisk.com/federal-register/2025-09754)
- [Next: 2025-09819, Petition for Reconsideration of Action in Rulemaking Proceeding](https://policyrisk.com/federal-register/2025-09819)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-09770 (as of 2026-10-26).
