# 2025-10061: FAA Finds the Wrong Titanium Alloy Hiding in 787 Seat Parts

2025-10061, Airworthiness Directives; the Boeing Company Airplanes, is a Federal Register rule from Transportation Department, Federal Aviation Administration published 2025-06-03, effective 2025-07-08; PRIA reads it as touching household money (as of 2026-10-27).

- Canonical: https://policyrisk.com/federal-register/2025-10061
- As of: 2026-10-27
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-10061
- Title: Airworthiness Directives; the Boeing Company Airplanes
- Type: Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 90 FR 23425
- Published: 2025-06-03
- Effective: 2025-07-08
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-10-27

## In one line

FAA Finds the Wrong Titanium Alloy Hiding in 787 Seat Parts

## Summary

The FAA is requiring inspections on certain Boeing 787 airplanes because some seat parts might be made from the wrong titanium alloy, which could be unsafe. Starting July 8, 2025, airlines must check these seat track fittings and fix any problems found. This keeps passengers safe and helps airlines avoid costly repairs later.

## Abstract

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of multiple supplier notices of escapement (NOEs) indicating that seat track splice fittings were possibly manufactured with an incorrect titanium alloy material. This AD requires an inspection of seat track splice fittings to determine the material and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Mandatory inspections start July 8, 2025: cost, high. Starting July 8, 2025, airlines/operators of Boeing Model 787-8, -9, and -10 airplanes must inspect seat track splice fittings to determine the material and do required follow-up actions per Boeing Alert Requirements Bulletin B787-81205-SB530086-00 RB, Issue 001, dated October 18, 2024. The FAA est…
- Possible replacement costs if wrong alloy found: cost, high. If inspections find affected seat track splice fittings, operators must replace them. The FAA estimates replacement labor up to 20 work-hours (20 x $85/hr = $1,700) plus parts up to $4,140, for a cost up to $5,840 per affected location, with up to 20 locations per airplane identified in the estimat…
- Reduces risk of seat failure and injury: benefit, high. The AD requires inspections and corrective actions because some seat track splice fittings may have been made from an incorrect titanium alloy; addressing this unsafe condition reduces the risk that seat track splice fittings fail and cause serious injury or impair emergency egress or structural re…
- Approved substitute collar part number: benefit, low. The AD allows an exception to specify that collars with part number BACC30BS10K may be used in tasks 17 and 18 in place of BACC30BS10S where the Boeing Requirements Bulletin references BACC30BS10S. Boeing confirmed both collars are structurally and functionally equivalent for those locations.

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2025-10061 on federalregister.gov](https://www.federalregister.gov/documents/2025/06/03/2025-10061/airworthiness-directives-the-boeing-company-airplanes)
- [2025-10061 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-06-03/pdf/2025-10061.pdf)

## Related
- [Previous: 2025-10060, Airworthiness Directives; The Boeing Company Airplanes](https://policyrisk.com/federal-register/2025-10060)
- [Next: 2025-10064, Civil Monetary Penalty Inflation Adjustments](https://policyrisk.com/federal-register/2025-10064)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-10061 (as of 2026-10-27).
