# 2025-13928: Federal Agencies Pull Back Plan for Truck Speed Limiters

2025-13928, Federal Motor Vehicle Safety Standards; Federal Motor Carrier Safety Regulations; Parts and Accessories Necessary for Safe Operation; Speed Limiting Devices; Withdrawal, is a Federal Register proposed rule from Transportation Department, Federal Motor Carrier Safety Administration, National Highway Traffic Safety Administration published 2025-07-24, effective 2025-07-24; deemed significant under Executive Order 12866; PRIA reads it as touching household money (as of 2026-11-17).

- Canonical: https://policyrisk.com/federal-register/2025-13928
- As of: 2026-11-17
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-13928
- Title: Federal Motor Vehicle Safety Standards; Federal Motor Carrier Safety Regulations; Parts and Accessories Necessary for Safe Operation; Speed Limiting Devices; Withdrawal
- Type: Proposed Rule
- Agencies: Transportation Department; Federal Motor Carrier Safety Administration; National Highway Traffic Safety Administration
- Citation: 90 FR 34822
- Published: 2025-07-24
- Effective: 2025-07-24
- Comments close: not stated
- Significant: yes (FR_METADATA)
- Touches household money: yes
- Regulation identifier numbers: 2126-AB63, 2127-AK92
- Last updated: 2026-11-17

## In one line

Federal Agencies Pull Back Plan for Truck Speed Limiters

## Summary

The government has decided to cancel plans that would have required big trucks (over 26,000 pounds) to have speed limiters to control how fast they can go. This change affects truck companies and drivers who were expecting new rules and costs related to installing and maintaining these devices. The withdrawal takes effect on July 24, 2025, meaning no new speed limiter rules will be enforced for now.

## Abstract

FMCSA and NHTSA withdraw the September 7, 2016 joint NPRM that proposed to require that heavy vehicles (those with a gross vehicle weight rating (GVWR) of more than 11,793 kilograms (26,000 pounds)) be equipped with a speed limiting device that is maintained at a set speed. FMCSA also withdraws its May 4, 2022 ANSPRM, which announced FMCSA's intent to proceed with a speed limiter rulemaking. The ANSPRM stated that FMCSA was preparing a supplemental notice of proposed rulemaking (SNPRM) to propose that motor carriers operating commercial motor vehicles (CMVs) in interstate commerce with a gross vehicle weight or GVWR of at least 11,794 kilograms (26,001 pounds), whichever is greater, and that are equipped with an engine control unit (ECU) capable of governing the maximum speed, be required to limit the CMV to a speed to be determined by the rulemaking and to maintain that ECU setting for the service life of the vehicle. In light of significant policy and safety concerns and continued data gaps that create considerable uncertainty about the estimated costs, benefits, and other impacts of the proposed rule, FMCSA and NHTSA have decided to withdraw the proposal.

## Effects PRIA read

- Mandatory truck speed limiter rule withdrawn: benefit, high. The Agencies withdrew the proposed rule that would have required heavy vehicles (GVWR over 11,793 kg / 26,000 pounds) to be equipped with and maintained at a set speed. The withdrawal (effective July 24, 2025) cancels the potential compliance costs the NPRM previously estimated could range from abo…
- Avoids potential reduced driver earnings: benefit, medium. Commenters and the Agencies noted that limiting truck speeds could reduce the number of miles drivers can travel and thereby reduce driver pay (because pay historically is tied to miles). With the withdrawal effective July 24, 2025, the Agencies are not imposing the speed limits that commenters sai…
- State speed-limit authority preserved: benefit, low. The Agencies concluded the proposed federal speed limiter rule could have, over time, displaced States' authority to set speed limits for heavy vehicles (the proposed limits analyzed were 60, 65, and 68 mph). By withdrawing the proposals as of July 24, 2025, the Agencies preserve State authority to…
- Voluntary use and availability of speed limiters unaffected: benefit, low. The Agencies state that all recently manufactured heavy vehicles come with electronic engine control units (ECUs) and that the withdrawal does not affect the availability of speed limiting devices or operators' ability to voluntarily set and maintain speed limits on their vehicles.

## Related documents

- [2026-08144](https://policyrisk.com/federal-register/2026-08144): Administrative Rulemaking, Guidance, and Enforcement Procedures, 2026-04-27
- [2026-23239](https://policyrisk.com/federal-register/2026-23239): Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles, 2026-11-16
- [2026-21794](https://policyrisk.com/federal-register/2026-21794): Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles, 2026-10-26
- [2026-19964](https://policyrisk.com/federal-register/2026-19964): The Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule III for Model Years 2022 to 2031 Passenger Cars and Light Trucks, 2026-09-30
- [2026-11072](https://policyrisk.com/federal-register/2026-11072): Federal Motor Vehicle Safety Standard No. 214; Side Impact Protection; Federal Motor Vehicle Safety Standard No. 305a; Electric-Powered Veh…, 2026-06-03
- [2026-05024](https://policyrisk.com/federal-register/2026-05024): Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 102 To Accommodate ADS-Equipped Vehicles, 2026-03-16

## Sources
- [2025-13928 on federalregister.gov](https://www.federalregister.gov/documents/2025/07/24/2025-13928/federal-motor-vehicle-safety-standards-federal-motor-carrier-safety-regulations-parts-and)
- [2025-13928 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-07-24/pdf/2025-13928.pdf)

## Related
- [Previous: 2025-13920, Airworthiness Directives; The Boeing Company Airplanes](https://policyrisk.com/federal-register/2025-13920)
- [Next: 2025-13930, Air Plan Approval; Texas; Reasonably Available Control Technology in the Dallas…](https://policyrisk.com/federal-register/2025-13930)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-13928 (as of 2026-11-17).
