# 2025-22218: FAA Mandates Stricter Inspections for Airbus Helicopter Gearboxes

2025-22218, Airworthiness Directives; Airbus Helicopters, is a Federal Register rule from Transportation Department, Federal Aviation Administration published 2025-12-08, effective 2026-01-12 (as of 2026-06-11).

- Canonical: https://policyrisk.com/federal-register/2025-22218
- As of: 2026-06-11
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2025-22218
- Title: Airworthiness Directives; Airbus Helicopters
- Type: Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 90 FR 56673
- Published: 2025-12-08
- Effective: 2026-01-12
- Comments close: not stated
- Significant: no
- Touches household money: no
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-06-11

## In one line

FAA Mandates Stricter Inspections for Airbus Helicopter Gearboxes

## Summary

If you fly Airbus Helicopters AS 332L2 or EC 225LP models, listen up! The FAA is updating safety rules to keep your main gearbox bolts and fittings in top shape by requiring inspections and a new design upgrade. Starting January 12, 2026, you’ll need to follow these steps to stay safe and legal—plus, some parts can’t be installed after the fix, so plan ahead!

## Abstract

The FAA is superseding Airworthiness Directive (AD) 2020-06- 12, which applied to certain Airbus Helicopters Model AS 332L2 and EC 225LP helicopters. AD 2020-06-12 required determining the accumulated hours time-in-service (TIS) of certain part-numbered main gearbox (MGB) suspension bar attachment bolts (bolt) and certain part-numbered MGB suspension bar attachment fittings (fitting), applying a life limit add-on factor, and inspecting the torque of certain MGB suspension bar attachment nuts (nuts). Since the FAA issued AD 2020-06-12, the manufacturer developed a design improvement, and the FAA determined that modifying the helicopter is necessary. This AD retains the actions required by AD 2020-06-12 and requires the modification of the MGB suspension bar, inspection of the torque, and corrective actions. This AD also allows credit for the initial service life calculations if certain requirements are met and prohibits installing a certain bolt after the modification is accomplished on any helicopter. The FAA is issuing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Immediate life‑limit checks for bolts and fittings: cost, high. If you operate Airbus Helicopters Model AS 332L2 or EC 225LP, you must review records within 30 hours time‑in‑service (TIS) after January 12, 2026 to determine total hours TIS of certain main gearbox (MGB) suspension bar bolts and fittings and apply the add‑on life‑limit factor from the referenced…
- Torque inspections and required fixes: cost, medium. For affected AS 332L2 helicopters (per applicability) you must inspect the torque of each MGB suspension bar attachment nut within 150 hours TIS (without the add‑on factor) after January 12, 2026. If torque is above the maximum or below the minimum, you must remove and replace the nut and its bolt…
- Mandatory modification (install MGB links) with deadlines: cost, high. You must modify the helicopter by installing MGB suspension bar attachment bracket links by the stated deadlines: for Model AS 332L2 within 825 hours TIS or 27 months after January 12, 2026 (whichever is first); for Model EC 225LP within 1,320 hours TIS or 40 months after January 12, 2026. Completi…
- Installation ban on specific bolts and fittings: cost, medium. As of January 12, 2026, you may not install specified front bolt P/N 332A22‑1613‑20 or 332A22‑1613‑21, rear bolt P/N 332A22‑1614‑20, or listed front/rear fitting P/Ns on any helicopter unless the part has not exceeded its service life limit after performing the life‑limit calculations and you calcu…
- Estimated U.S. fleet impact and compliance costs: cost, medium. The FAA estimates this AD affects 30 U.S. helicopters (2 AS 332L2 and 28 EC 225LP). Example cost estimates: record reviews 0.5 hour ($43) per component; replacing a fitting about $7,680 each (8 hours + $7,000 parts); replacing a bolt about $429 each (4 hours + $89 parts); torque inspection about $3…

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2025-22218 on federalregister.gov](https://www.federalregister.gov/documents/2025/12/08/2025-22218/airworthiness-directives-airbus-helicopters)
- [2025-22218 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2025-12-08/pdf/2025-22218.pdf)

## Related
- [Previous: 2025-22217, Airworthiness Directives; Airbus Helicopters Deutschland GmbH](https://policyrisk.com/federal-register/2025-22217)
- [Next: 2025-22225, Airworthiness Directives; Airbus Helicopters](https://policyrisk.com/federal-register/2025-22225)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2025-22218 (as of 2026-06-11).
