# 2026-05773: EPA Frees Up Silly-Sounding Chemical from Food Safety Limits

2026-05773, Dimethylpolysiloxane in Pesticide Formulations; Exemption From the Requirement for a Tolerance, is a Federal Register rule from Environmental Protection Agency published 2026-03-25, effective 2026-03-25; PRIA reads it as touching household money (as of 2026-06-11).

- Canonical: https://policyrisk.com/federal-register/2026-05773
- As of: 2026-06-11
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2026-05773
- Title: Dimethylpolysiloxane in Pesticide Formulations; Exemption From the Requirement for a Tolerance
- Type: Rule
- Agencies: Environmental Protection Agency
- Citation: 91 FR 14461
- Published: 2026-03-25
- Effective: 2026-03-25
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: none
- Last updated: 2026-06-11

## In one line

EPA Frees Up Silly-Sounding Chemical from Food Safety Limits

## Summary

The EPA just made it official: dimethylpolysiloxane, a chemical used in some pesticides, no longer needs a safety limit on food or feed when used properly. This change helps farmers, food makers, and pesticide companies by cutting red tape and speeding up product approvals. The new rule kicks in on March 25, 2026, with a chance to raise concerns by May 26, 2026.

## Abstract

This regulation establishes an exemption from the requirement of a tolerance for residues of methyl end-capped polydimethylsiloxane (CAS Reg. No 63148-62-9); also known as dimethylpolysiloxane when used as an inert ingredient in a pesticide chemical formulation under 40 CFR 180.960. Momentive Performance Materials, Inc submitted a petition to EPA under the Federal Food, Drug, and Cosmetic Act (FFDCA), requesting an exemption from the requirement of a tolerance. This regulation eliminates the need to establish a maximum permissible level for residues of methyl end-capped polydimethylsiloxane on food or feed commodities when used in accordance with these exemptions.

## Effects PRIA read

- Tolerance Exemption for Inert Ingredient: benefit, medium. The EPA exempted methyl end-capped polydimethylsiloxane (dimethylpolysiloxane, CAS 63148-62-9) from the requirement to set a tolerance (a numerical safety limit) when it is used as an inert ingredient in pesticide formulations applied according to the exemption. This eliminates the need to establis…
- Lowered Molecular-Weight Threshold: benefit, medium. The rule revises Table 1 to 40 CFR 180.960 to change the minimum number average molecular weight for dimethylpolysiloxane from 6,800 amu to 1,200 amu. This numeric change allows dimethylpolysiloxane formulations with a minimum average molecular weight of 1,200 Daltons to qualify for the exemption w…
- No Analytical Enforcement Method Required: benefit, low. Because EPA is establishing an exemption without any numerical tolerance, the Agency states that an analytical method for enforcement is not required. That means laboratories and regulated parties will not have a required test method to measure a numeric residue limit for this substance under this…
- EPA Safety Finding for Consumers: benefit, low. EPA concluded there is a reasonable certainty of no harm to the U.S. population, including infants and children, from aggregate exposure to methyl end-capped polydimethylsiloxane as used under this exemption. The Agency found the polymer meets low-risk criteria and determined a tolerance is not nec…

## Related documents

- [2026-22082](https://policyrisk.com/federal-register/2026-22082): Additional Reconsideration Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sour…, 2026-10-29
- [2026-21155](https://policyrisk.com/federal-register/2026-21155): Renewable Fuel Standard (RFS) Program: Reallocation of Additional 2025 Small Refinery Exemptions, 2026-10-16
- [2026-20849](https://policyrisk.com/federal-register/2026-20849): Clean Water Act Hazardous Substance Facility Response Plans: Compliance Date Delay and Changes To Reflect Administration Policy, 2026-10-13
- [2026-19071](https://policyrisk.com/federal-register/2026-19071): Partial Repeal of the Carbon Pollution Standards for Fossil Fuel-Fired Electric Generating Units, 2026-09-17
- [2026-19072](https://policyrisk.com/federal-register/2026-19072): Rescission of the Greenhouse Gas Findings for Fossil Fuel-Fired Power Plants and Repeal of Regulations for Power Plant Greenhouse Gas Emiss…, 2026-09-17
- [2026-18317](https://policyrisk.com/federal-register/2026-18317): Updated Definition of “Waters of the United States”, 2026-09-09

## Sources
- [2026-05773 on federalregister.gov](https://www.federalregister.gov/documents/2026/03/25/2026-05773/dimethylpolysiloxane-in-pesticide-formulations-exemption-from-the-requirement-for-a-tolerance)
- [2026-05773 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2026-03-25/pdf/2026-05773.pdf)

## Related
- [Previous: 2026-05772, General and Plastic Surgery Devices; Reclassification of Optical Diagnostic Dev…](https://policyrisk.com/federal-register/2026-05772)
- [Next: 2026-05803, Pacific Halibut Fisheries; Catch Sharing Plan; 2026 Annual Management Measures](https://policyrisk.com/federal-register/2026-05803)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2026-05773 (as of 2026-06-11).
