# 2026-06304: EPA Tightens Leaks in Chemical Factories for Cleaner Air

2026-06304, National Emission Standards for Hazardous Air Pollutants: Chemical Manufacturing Area Sources Technology Review, is a Federal Register rule from Environmental Protection Agency published 2026-04-01, effective 2026-04-01; PRIA reads it as touching household money (as of 2026-06-11).

- Canonical: https://policyrisk.com/federal-register/2026-06304
- As of: 2026-06-11
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2026-06304
- Title: National Emission Standards for Hazardous Air Pollutants: Chemical Manufacturing Area Sources Technology Review
- Type: Rule
- Agencies: Environmental Protection Agency
- Citation: 91 FR 16502
- Published: 2026-04-01
- Effective: 2026-04-01
- Comments close: not stated
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2060-AU73
- Last updated: 2026-06-11

## In one line

EPA Tightens Leaks in Chemical Factories for Cleaner Air

## Summary

The EPA is updating rules for chemical factories to catch and fix leaks faster, keep an eye on pressure devices, and report pollution data electronically. These changes start April 1, 2026, and help keep the air cleaner without big costs. If you run or work with chemical manufacturing equipment, these new rules affect you and make sure pollution stays in check with smarter tech and better reporting.

## Abstract

The Environmental Protection Agency (EPA) is finalizing amendments to the National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Chemical Manufacturing Area Source (CMAS) categories pursuant to a technology review under Clean Air Act (CAA) section 112(d)(6). Specifically, the EPA is finalizing new leak detection and repair (LDAR) requirements for equipment leaks and heat exchange systems in organic hazardous air pollutant (HAP) service. In addition, the EPA is taking final action to add standards for pressure relief devices (PRDs) and pressure vessels; require electronic reporting for notification of compliance status (NOCS), performance test reports, and periodic reports; and require continuous performance testing of non-flare air pollution control devices (APCD). The EPA is not finalizing the proposed area source category for chemical manufacturing with ethylene oxide (EtO) or related standards at this time.

## Effects PRIA read

- New LDAR instrument monitoring rules: cost, high. If you own or operate a chemical manufacturing process unit, you must perform annual instrument monitoring of pumps in light-liquid service, valves in gas/vapor and light-liquid service, and connectors in gas/vapor and light-liquid service using EPA Method 21 with a leak definition of 10,000 parts…
- Heat exchanger quarterly testing: cost, high. If you operate a heat exchange system in organic HAP service with flowrates greater than or equal to 8,000 gallons per minute (gpm), you must conduct quarterly monitoring (after an initial six months of monthly monitoring if not already completed) using the Modified El Paso Method and repair leaks…
- Alternative monitoring option for exchangers: benefit, low. Owners/operators may use the current heat exchange monitoring requirements at 40 CFR 63.104(b) instead of the Modified El Paso Method only if 99 percent by weight or more of organic compounds that could leak are water soluble and have a Henry's Law constant less than 5.0E-6 atm·m3/mol at 25°C.
- Pressure vessel no-detectable emission rule: cost, high. Pressure vessels in organic HAP service must meet a no-detectable-emissions requirement: each potential emission point must have an instrument reading less than 500 ppmv, with initial and annual monitoring using EPA Method 21, and organic HAP must be routed through a closed vent system to a control…
- PRD monitoring, recording, and root-cause steps: cost, medium. Owners/operators must monitor pressure relief devices (PRDs) in organic HAP service for leaks after placing a PRD into service following a pressure release, record the time and duration of each pressure release, perform root-cause analysis and corrective action if a PRD releases directly to the atm…
- No bypassing of control devices allowed: cost, medium. For closed vent systems with bypass lines, owners/operators may not bypass the air pollution control device (APCD) at any time; doing so is a deviation. Using a cap, blind flange, plug, or second valve on open-ended valves or lines is sufficient to prevent a bypass. The exemption for gas streams ex…
- Electronic reporting via CDX/CEDRI required: cost, low. Owners/operators must submit certain reports electronically: notification of compliance status (NOCS) as a PDF upload, performance test reports in the EPA Electronic Reporting Tool (ERT) format or XML schema, and periodic reports using the CEDRI spreadsheet templates via the EPA's Central Data Exch…
- Continuous APCD performance testing required: cost, high. The final rule requires continuous performance testing/monitoring of non-flare air pollution control devices (APCDs) as part of the CMAS NESHAP amendments.
- Five-year recurring performance tests: cost, medium. Owners/operators must conduct subsequent performance testing once every five years to demonstrate compliance with emission limits for certain process vents.
- Affirmative defense provisions removed: cost, medium. The EPA is eliminating the affirmative defense provisions in the CMAS NESHAP (specifically 40 CFR 63.11501(e) and the definition of 'affirmative defense' in 40 CFR 63.11502(b)), in line with court precedent.
- Effective/compliance dates and cost estimate: cost, high. This final rule is effective April 1, 2026. Existing affected sources must comply with the amendments no later than April 1, 2029, or upon startup, whichever is later. The EPA estimates present value (PV) costs of $72 million at a 3% discount rate and $56 million at a 7% discount rate over 2027–204…
- EtO area-source action deferred: benefit, low. The EPA is not finalizing the proposed listing and regulation of ethylene oxide (EtO) from area sources (NAICS code 325) at this time; the Agency will take additional time to consider comments and coordinate with EtO regulation for major sources.

## Related documents

- [2026-22082](https://policyrisk.com/federal-register/2026-22082): Additional Reconsideration Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sour…, 2026-10-29
- [2026-21155](https://policyrisk.com/federal-register/2026-21155): Renewable Fuel Standard (RFS) Program: Reallocation of Additional 2025 Small Refinery Exemptions, 2026-10-16
- [2026-20849](https://policyrisk.com/federal-register/2026-20849): Clean Water Act Hazardous Substance Facility Response Plans: Compliance Date Delay and Changes To Reflect Administration Policy, 2026-10-13
- [2026-19071](https://policyrisk.com/federal-register/2026-19071): Partial Repeal of the Carbon Pollution Standards for Fossil Fuel-Fired Electric Generating Units, 2026-09-17
- [2026-19072](https://policyrisk.com/federal-register/2026-19072): Rescission of the Greenhouse Gas Findings for Fossil Fuel-Fired Power Plants and Repeal of Regulations for Power Plant Greenhouse Gas Emiss…, 2026-09-17
- [2026-18317](https://policyrisk.com/federal-register/2026-18317): Updated Definition of “Waters of the United States”, 2026-09-09

## Sources
- [2026-06304 on federalregister.gov](https://www.federalregister.gov/documents/2026/04/01/2026-06304/national-emission-standards-for-hazardous-air-pollutants-chemical-manufacturing-area-sources)
- [2026-06304 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2026-04-01/pdf/2026-06304.pdf)

## Related
- [Previous: 2026-06281, Rescission of OCC Guidelines Establishing Standards for Recovery Planning by Ce…](https://policyrisk.com/federal-register/2026-06281)
- [Next: 2026-06306, Safety Standard for Gates and Enclosures](https://policyrisk.com/federal-register/2026-06306)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2026-06304 (as of 2026-06-11).
