# 2026-15003: Military to Buy American Materials Starting 2027 2026-15003, Securing America's Defense Supply Chains and Ensuring Domestic Acquisition of Critical Materials, is a Federal Register presidential document from Executive Office of the President published 2026-07-23, effective 2026-07-20; PRIA reads it as touching household money (as of 2026-11-03). - Canonical: https://policyrisk.com/federal-register/2026-15003 - As of: 2026-11-03 - Plain-text twin of the page above; the HTML and this file carry the same facts. ## Facts - Document number: 2026-15003 - Title: Securing America's Defense Supply Chains and Ensuring Domestic Acquisition of Critical Materials - Type: Presidential Document - Agencies: Executive Office of the President - Citation: 91 FR 46693 - Published: 2026-07-23 - Effective: 2026-07-20 - Comments close: not stated - Significant: no - Touches household money: yes - Regulation identifier numbers: none - Last updated: 2026-11-03 ## In one line Military to Buy American Materials Starting 2027 ## Summary Starting January 1, 2027, the U.S. military will tighten rules to buy critical materials only from American or allied sources, cutting out risky foreign suppliers. Defense contractors must now prove they’ve tried hard to get these materials domestically or from allies before asking for exceptions. This move boosts national security, strengthens supply chains, and keeps America’s defense gear top-notch and ready to roll. ## Effects PRIA read - Waivers for Foreign Materials Cut Off: cost, high. If you are a defense contractor or subcontractor, the government will stop issuing waivers under 10 U.S.C. 4872(c)(1) starting January 1, 2027, except in narrow cases the order allows. Waivers under 10 U.S.C. 4872(e) will only be issued as the order describes or after a request to the Assistant to… - Strict Mitigation Plans Required for Any Waiver: cost, medium. If a contractor requests a waiver that is still allowed under the order, the prime contractor or subcontractor must submit a formal mitigation plan accepted by the Secretary. The plan must identify the non-compliant source, show exhaustive efforts to find compliant material, describe steps to remov… - Full Supply-Chain Mapping and Bill of Materials: cost, high. Within 180 days of the order, contractors will have to map critical supply chains and the Department will issue regulations requiring an indentured Bill of Materials tracing components back to raw materials. The rules will also require vetting suppliers for financial, foreign ownership/control/infl… - Fast Timelines for Vetting and Corrective Action: cost, medium. After completing supplier vetting, contractors must notify the Department of any significant risks within 15 days and submit a confidential corrective action plan within 45 days, then provide a closeout report when done. These deadlines are set in the order as required follow-up steps after vetting. - Must Qualify Domestic Alternatives or Risk Contracts: cost, high. Within 180 days, the Department will require contractors who rely on materials from an unreliable foreign supplier to qualify and use alternative domestic or allied sources where available. Failure to qualify an alternative source can be grounds to suspend or terminate task orders, decline contract… - Project Vault and U.S.-Funded Sources Exempted: benefit, low. The order says it does not affect the U.S. Strategic Critical Minerals Reserve (Project Vault) or acquisitions of critical materials financed, guaranteed, or insured by the Export-Import Bank or the U.S. International Development Finance Corporation. Sales from Project Vault to contractors are not… - Fraud or Misleading Mitigation Plans Trigger Remedies: cost, medium. If the Secretary finds a contractor engaged in fraud or deliberately misled the government about a mitigation plan, the Secretary may use contractual remedies and may refer the matter to the Attorney General for investigation and possible prosecution. The order requires the Secretary to list availa… ## Related documents - [2026-22385](https://policyrisk.com/federal-register/2026-22385): Adjusting Imports of Robotics, Industrial Machinery, and Their Parts and Components Into the United States, 2026-11-02 - [2026-22292](https://policyrisk.com/federal-register/2026-22292): Further Modifying the Scope of Products of Canada Subject to the Additional Duties Imposed To Offset Canadian Discrimination Against the Co…, 2026-10-30 - [2026-22049](https://policyrisk.com/federal-register/2026-22049): Adjusting Imports of Wind Turbines and Their Parts and Components Into the United States, 2026-10-28 - [2026-22052](https://policyrisk.com/federal-register/2026-22052): Presidential Determination Pursuant to Section 303 of the Defense Production Act of 1950, as Amended, on Domestic Petroleum Production, Ref…, 2026-10-28 - [2026-22051](https://policyrisk.com/federal-register/2026-22051): Decreasing Housing Costs for the American People, 2026-10-28 - [2026-22050](https://policyrisk.com/federal-register/2026-22050): National Seafood Month, 2026, 2026-10-28 ## Sources - [2026-15003 on federalregister.gov](https://www.federalregister.gov/documents/2026/07/23/2026-15003/securing-americas-defense-supply-chains-and-ensuring-domestic-acquisition-of-critical-materials) - [2026-15003 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2026-07-23/pdf/2026-15003.pdf) ## Related - [Previous: 2026-14999, Made in America Week, 2026](https://policyrisk.com/federal-register/2026-14999) - [Next: 2026-15024, Continuation of the National Emergency With Respect to Mali](https://policyrisk.com/federal-register/2026-15024) - [All Federal Register documents](https://policyrisk.com/federal-register) Source: PRIA, https://policyrisk.com/federal-register/2026-15003 (as of 2026-11-03).