# 2026-23372: FAA Tweaks TBM Landing Gear Checks, Retiring the Dye Test

2026-23372, Airworthiness Directives; Daher Aircraft, SAS, is a Federal Register proposed rule from Transportation Department, Federal Aviation Administration published 2026-11-17, effective The FAA must receive comments on this NPRM by January 4, 2027.; PRIA reads it as touching household money (as of 2026-11-17).

- Canonical: https://policyrisk.com/federal-register/2026-23372
- As of: 2026-11-17
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2026-23372
- Title: Airworthiness Directives; Daher Aircraft, SAS
- Type: Proposed Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 91 FR 73714
- Published: 2026-11-17
- Effective: The FAA must receive comments on this NPRM by January 4, 2027.
- Comments close: 2027-01-04
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-11-17

## In one line

FAA Tweaks TBM Landing Gear Checks, Retiring the Dye Test

## Summary

If you own or fly a Daher TBM 700 airplane, the FAA wants you to keep checking the main landing gear for cracks but with some new rules. They’re adding more approved parts and saying no more dye penetrant inspections. You’ve got until January 4, 2027, to share your thoughts, and these changes help keep flights safe without extra costs for replacing gear.

## Abstract

The FAA proposes to supersede Airworthiness Directive (AD) 2015-17-10, which applies to certain SOCATA (type certificate currently held by Daher Aircraft, SAS) (Daher) Model TBM 700 airplanes. AD 2015- 17-10 requires repetitively inspecting the forging body of the main landing gear (MLG) for cracks and, depending on findings, performing corrective actions. AD 2015-17-10 allows for replacement of affected MLG with a reinforced landing gear as a terminating action for repetitive inspections. Since the FAA issued AD 2015-17-10, additional MLG serviceable parts have been developed, and it has been determined that dye penetrant is no longer an authorized inspection method. This proposed AD would continue to require the actions of AD 2015-17-10, add the additional serviceable parts, and eliminate the option of using dye penetrant as an inspection method. The FAA is proposing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Mandatory MLG inspections every 240 landings: cost, medium. If you operate a Daher TBM 700 with an “affected part” (MLG forging body P/N 21236-000-00, 21236-000-01, 22609-000-00, 22609-001-00, 22611-000-00, 22611-001-00, D67685, or D67686) and your airplane serial number is 1–638 or 687, you must do a special detailed inspection of the main landing gear for…
- Dye penetrant inspection removed: cost, low. The rule explicitly removes dye penetrant as an authorized method for the repetitive special detailed inspection; the SDI must be done by eddy current or fluorescent penetrant per the service bulletin and MCAI.
- Replace MLG to stop inspections (terminating action): mixed, high. You may stop the repetitive inspections by installing a “serviceable part” (any MLG forging body that is not an affected part) on both left and right MLGs in accordance with the listed service bulletins; replacement is a terminating action for the inspection requirement. The FAA estimates replaceme…
- On-condition and confirmation inspection costs: cost, medium. If a crack is suspected during the SDI, you must remove the MLG leg and confirm the crack with a fluorescent penetrant inspection (estimated 8 work-hours × $85/hr = $680). If replacement is chosen as the corrective action, the AD estimates parts + labor cost at $6,340 per replacement.
- Credit for prior inspections under listed bulletins: benefit, low. If you already performed the required actions before this AD's effective date using the listed Daher service bulletins (Revisions 2, 3, 4, or Revision 4/Revision 3 etc. as specified), you receive credit toward the AD requirements, so you do not need to repeat those actions to comply.

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2026-23372 on federalregister.gov](https://www.federalregister.gov/documents/2026/11/17/2026-23372/airworthiness-directives-daher-aircraft-sas)
- [2026-23372 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2026-11-17/pdf/2026-23372.pdf)

## Related
- [Previous: 2026-23370, Modernizing the Labor Market Test and Improving Protections for U.S. Workers in…](https://policyrisk.com/federal-register/2026-23370)
- [Next: 2026-23390, Respirable Crystalline Silica and Respiratory Protection](https://policyrisk.com/federal-register/2026-23390)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2026-23372 (as of 2026-11-17).
