# 2026-23579: FAA Expands Titanium Screw Fix Across Several Falcon Jets

2026-23579, Airworthiness Directives; Dassault Aviation Airplanes, is a Federal Register proposed rule from Transportation Department, Federal Aviation Administration published 2026-11-19, effective The FAA must receive comments on this proposed AD by January 4, 2027.; PRIA reads it as touching household money (as of 2026-11-19).

- Canonical: https://policyrisk.com/federal-register/2026-23579
- As of: 2026-11-19
- Plain-text twin of the page above; the HTML and this file carry the same facts.

## Facts
- Document number: 2026-23579
- Title: Airworthiness Directives; Dassault Aviation Airplanes
- Type: Proposed Rule
- Agencies: Transportation Department; Federal Aviation Administration
- Citation: 91 FR 74511
- Published: 2026-11-19
- Effective: The FAA must receive comments on this proposed AD by January 4, 2027.
- Comments close: 2027-01-04
- Significant: no
- Touches household money: yes
- Regulation identifier numbers: 2120-AA64
- Last updated: 2026-11-19

## In one line

FAA Expands Titanium Screw Fix Across Several Falcon Jets

## Summary

The FAA wants to update safety rules for certain Dassault Falcon 7X, 900EX, and 2000EX airplanes by replacing more titanium screws in more places and on more planes. This keeps the planes safe by fixing a known problem and limits installing risky parts. Owners need to act by early 2027, so get ready to swap those screws and keep flying safely!

## Abstract

The FAA proposes to supersede Airworthiness Directive (AD) 2024-14-09, which applies to certain Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. AD 2024-14-09 requires replacement of certain titanium screws, adds other locations for screw replacement, and revises the applicability from AD 2022-02-10. Since the FAA issued AD 2024-14-09, affected parts have been found in other areas of certain FALCON 7X airplanes as well as in additional FALCON 7X airplanes. This proposed AD would continue to require the actions in AD 2024-14-09 and would require expanding the applicability to additional airplanes, expanding the locations for screw replacement, and revising the compliance times for parts replacement. This AD would also limit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.

## Effects PRIA read

- Mandatory screw replacement and inspection: cost, high. If you operate a Dassault FALCON 7X, 900EX, or 2000EX airplane covered by this rule, you must replace certain Decomatic titanium screws, inspect the screw bore dimensions, and perform corrective actions (oversizing or repair) as specified in EASA AD 2025-0228R1 and Dassault Service Bulletin 7X-467.…
- More airplanes and locations added: cost, medium. The proposed AD expands which airplanes and which areas on those airplanes are subject to the screw replacement rules: additional Model FALCON 7X airplanes and additional locations on certain FALCON 7X airplanes were added to the applicability. The FAA states this proposed AD would expand applicabi…
- Compliance times set to flight cycles only: mixed, low. EASA AD 2025-0228R1 removed calendar-based compliance times and defines the parts-replacement compliance times in flight cycles (FC) only. This proposed FAA AD would require compliance with the timing specified in EASA AD 2025-0228R1.
- Limits on installing affected titanium screws: cost, medium. The proposed AD would limit installation of certain affected Decomatic titanium screws under specified conditions, as stated in EASA AD 2025-0228R1. The MCAI and the proposed AD explicitly say the rule 'limits installation of certain Decomatic titanium screws.'
- Estimated compliance cost and fleet affected: cost, high. The FAA estimates this proposed AD would affect 52 U.S.-registered airplanes. The FAA estimates up to 250 work-hours at $85 per hour for certain replacements (labor), rental of special tooling at $524 per day for some Model FALCON 7X serial numbers, parts cost up to $21,774, and total estimated cos…

## Related documents

- [2026-15585](https://policyrisk.com/federal-register/2026-15585): Requirements for Interference-Tolerant Radio Altimeter Systems, 2026-07-31
- [2026-13440](https://policyrisk.com/federal-register/2026-13440): Enabling Supersonic Overland Flight, 2026-07-02
- [2026-13126](https://policyrisk.com/federal-register/2026-13126): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period, 2026-06-30
- [2026-08943](https://policyrisk.com/federal-register/2026-08943): Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility, 2026-05-06
- [2025-04846](https://policyrisk.com/federal-register/2025-04846): Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya, 2025-03-20
- [2025-03853](https://policyrisk.com/federal-register/2025-03853): Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Corre…, 2025-03-11

## Sources
- [2026-23579 on federalregister.gov](https://www.federalregister.gov/documents/2026/11/19/2026-23579/airworthiness-directives-dassault-aviation-airplanes)
- [2026-23579 as published (PDF)](https://www.govinfo.gov/content/pkg/FR-2026-11-19/pdf/2026-23579.pdf)

## Related
- [Previous: 2026-23576, Airworthiness Directives; Airbus Helicopters Deutschland GmbH (AHD) Helicopters](https://policyrisk.com/federal-register/2026-23576)
- [Next: 2026-23581, Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes](https://policyrisk.com/federal-register/2026-23581)
- [All Federal Register documents](https://policyrisk.com/federal-register)

Source: PRIA, https://policyrisk.com/federal-register/2026-23579 (as of 2026-11-19).
