EPA Gives Aerosol Coatings More Time to Meet Pollution Rules
Published Date: 7/2/2025
Rule
Summary
The EPA is giving companies more time to meet new pollution rules for aerosol spray products by pushing the deadline from July 2025 to January 2027. This change helps businesses adjust without rushing, while still aiming to keep our air cleaner. If you make or sell aerosol coatings, this update affects you and you can share your thoughts with the EPA by August 1, 2025.
Analyzed Economic Effects
2 provisions identified: 2 benefits, 0 costs, 0 mixed.
Compliance deadline delayed to January 17, 2027
The EPA changed the compliance date for the aerosol coatings amendments (finalized January 17, 2025) from July 17, 2025 to January 17, 2027. The interim final rule is effective July 2, 2025, and the EPA says the extension could reduce burden and result in cost savings for regulated entities that need to reformulate, relabel, or change distribution practices.
Keep using existing tables and test methods until 2027
Until January 17, 2027, the existing appendix A tables (table 1, tables 2A–2C) and the test methods listed in appendix A table 3 remain applicable, and regulated entities may elect to use those tables and the test methods specified in 40 CFR 59.508. After January 17, 2027, the updated tables and procedures in the amended rule will apply.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-22082, Additional Reconsideration Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sources: Oil and Natural Gas Sector Climate Review
The EPA is updating rules for oil and natural gas companies to fix issues from last year’s changes. They’re scrapping the Super Emitter Program, splitting well sites into clearer groups, and tweaking rules on leaks, equipment, and inspections. Companies should get ready to comment by December 16, 2026, as these updates could affect how they manage emissions and operate equipment.
2026-21155, Renewable Fuel Standard (RFS) Program: Reallocation of Additional 2025 Small Refinery Exemptions
The EPA is updating how it handles small refinery exemptions (SREs) for 2025 under the Renewable Fuel Standard. They’re deciding whether to spread the extra exemptions between 2026 and 2027 or give them all to 2027. This change might also push back the 2026 compliance deadline, affecting refiners and renewable fuel producers with potential timing and cost impacts.
2026-20849, Clean Water Act Hazardous Substance Facility Response Plans: Compliance Date Delay and Changes To Reflect Administration Policy
The EPA is giving facilities more time to meet new Clean Water Act rules for handling hazardous spills, pushing back the deadline to help them get ready. They’re also removing mentions of climate change and environmental justice to match new government policies. This delay helps facilities plan better without rushing and lets the EPA rethink the rules if needed.
2026-19072, Rescission of the Greenhouse Gas Findings for Fossil Fuel-Fired Power Plants and Repeal of Regulations for Power Plant Greenhouse Gas Emissions Under Clean Air Act Section 111
The EPA is proposing to cancel all greenhouse gas rules for fossil fuel power plants, saying the law doesn’t let them regulate these emissions for climate reasons. This change affects power plants across the U.S. and could impact future pollution limits and costs. Comments on this proposal are open until November 2, 2026, so now’s the time to speak up!
2026-19071, Partial Repeal of the Carbon Pollution Standards for Fossil Fuel-Fired Electric Generating Units
The EPA is rolling back most of the 2024 rules that limited carbon pollution from fossil fuel power plants. This change affects coal and gas plants by easing some strict limits on emissions and carbon capture technology. The new rules kick in on November 16, 2026, potentially saving money for power plants but raising questions about pollution control.
2026-18317, Updated Definition of “Waters of the United States”
The purpose of this supplemental notice of proposed rulemaking is for the U.S. Environmental Protection Agency (EPA) and the Department of the Army ("the agencies") to supplement and seek additional comment on certain aspects of an earlier proposal, published on November 20, 2025, to revise the regulations defining the scope of waters federally covered under the Clean Water Act in light of the U.S. Supreme Court's 2023 decision in Sackett v. Environmental Protection Agency. As stated in the agencies' November 20, 2025 Notice of Proposed Rulemaking (NPRM), the agencies intend for this rulemaking to provide greater regulatory certainty and increase Clean Water Act program predictability and consistency by clarifying the definition of "waters of the United States." After consideration of the public comments received on the NPRM, the agencies are issuing this notice to supplement the NPRM with additional regulatory options on certain aspects of the proposed rule.
Previous / Next Documents
Previous: 2025-12319, Allocation of Assets in Single-Employer Plans; Interest Assumptions for Valuing Benefits
Starting July 31, 2025, new interest rates will be used to figure out how much money single-employer pension plans need when they end. This change affects companies and workers with these pension plans, helping make sure benefits are valued fairly and accurately. It’s all about keeping pension money calculations up-to-date with current market conditions, so everyone gets what they deserve.
Next: 2025-12328, Energy Conservation Standards for Manufactured Housing
The Department of Energy is pushing back the deadline for new energy-saving rules on manufactured homes. Instead of starting July 1, 2025, manufacturers get more time while DOE sorts out enforcement details. This delay helps builders get clear instructions without rushing, saving money and hassle down the road.