FAA Targets Cracks in Boeing 767 Wings with New Inspections
Published Date: 1/26/2026
Proposed Rule
Summary
The FAA is updating safety rules for certain Boeing 767-300 planes to catch and fix cracks in the lower wing skin. This update adds more planes to the list, especially those with special winglets removed, and requires extra inspections to keep flights safe. Owners should act before March 12, 2026, to avoid costly repairs and keep their planes flying smoothly.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Mandatory Wing Skin Inspections
If you operate certain Boeing 767-300 or -300F airplanes, the FAA would require high frequency eddy current (HFEC) inspections of the lower outboard wing skin and repairs if cracks are found. For Group 3 airplanes the rule would require initial internal and external HFEC inspections at the time specified in the service bulletin or within 3,000 flight cycles after the AD's effective date, and any crack must be repaired before further flight.
FAA Cost Estimates and Repair Charges
The FAA estimates the proposed AD would affect 195 U.S.-registered airplanes. The estimated labor cost is $85 per hour: HFEC inspections are 6 work-hours ($510) per inspection cycle, internal/external HFEC inspections for Group 3 are 3 work-hours ($255) per inspection cycle, a repair/modification is estimated at 262 work-hours ($22,270), and post-repair inspections are estimated at $510 per cycle.
Expanded Applicability to STC ST01920SE
The proposed AD adds airplanes that were modified by Supplemental Type Certificate ST01920SE to the list of affected models, even if the STC winglets were later removed. If your airplane was ever modified under STC ST01920SE, you must follow the inspections and any required repairs in this AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-01351, Marketing Order for Onions Grown in South Texas (M.O. No. 959); Hearing
South Texas onion growers and their supporters are invited to a hearing on February 3-4, 2026, to discuss changes that could make marketing easier and more powerful. The proposed updates include lowering voting rules, boosting advertising efforts, allowing voluntary donations, and adding a public member to the committee. These changes aim to help onions shine brighter in the market without adding extra costs right away.
Next: 2026-01382, Dependent Care and Board Member Expense Reimbursement
The NCUA wants to let federal credit union volunteer board members get reimbursed for reasonable dependent care costs when they attend meetings or do official work. This change helps make volunteering easier for those with family care needs by allowing credit unions to create friendlier policies. Comments on this proposal are open until March 27, 2026, so now’s the time to weigh in!