Airworthiness Directives; Airbus Helicopters Deutschland GmbH (AHD) Helicopters
Published Date: 1/30/2026
Rule
Summary
If you fly an Airbus Helicopters Deutschland MBB-BK117 D-3, listen up! The FAA found some bolts on the swashplate wearing out too fast, which could be risky. Starting February 17, 2026, helicopter owners must inspect these bolts regularly and fix any problems, plus only use new or approved bolts. This keeps flights safe and might cost some time and money for checks and repairs.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Mandatory swashplate inspections start Feb 17, 2026
If you operate an Airbus Helicopters Deutschland Model MBB-BK117 D-3, you must perform initial and repetitive inspections of the swashplate for vertical and radial play and do corrective actions as required. The AD is effective February 17, 2026, and the initial inspection must be done within 830 hours time-in-service (TIS) since new of the bearing bolt, or within 10 hours TIS after February 17, 2026, whichever occurs later; if the bolt TIS is unknown, use the swashplate TIS.
FAA cost estimates: inspections and replacements
The FAA estimates this AD affects 55 U.S.-registered helicopters. The agency estimates an inspection costs 3 work-hours at $85 per hour, totaling $255 per helicopter and $14,025 for the U.S. fleet. The AD also lists replacement (on-condition) costs with parts cost $3,250 and shows labor as 30 work-hours at $85 per hour and a cost-per-product figure of $2,550 (as stated in the rule).
New limits on installing affected bolts
Starting February 17, 2026, the AD prohibits installing any affected bearing bolt on these helicopters unless the bolt is new (defined as zero hours time-in-service) or certain specified requirements are met. This restriction applies to installation of the bolts connecting the cardan ring and the control ring assembly.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-01868, Establishing the Gordie Howe International Bridge as a Port of Entry in Detroit, MI
Starting March 2, 2026, the Gordie Howe International Bridge in Detroit becomes an official port of entry for both immigration and customs. This means U.S. Customs and Border Protection will handle travelers and shipments there more efficiently, making border crossing smoother for everyone involved. Carriers, importers, and the public can expect better service and faster processing at this new crossing point.
Next: 2026-01884, Delete, Delete, Delete; Withdrawal
The FCC planned to delete some old and unnecessary rules to keep things fresh, but after hearing concerns, they decided to keep certain rules for now. This affects anyone following FCC rules about communications, with no immediate cost changes but a delay in some clean-up actions. The hold on these deletions starts February 10, 2026, giving more time for public input.