New Hampshire Plasma Cutters Get Import Tax Perks in FTZ
Published Date: 3/26/2026
Notice
Summary
Hypertherm Inc. wants to start making plasma cutting parts at its New Hampshire factories using special foreign materials with lower import taxes. This change could save the company money on duties and speed up production. People have until May 5, 2026, to share their thoughts before the plan moves forward.
Analyzed Economic Effects
1 provisions identified: 1 benefits, 0 costs, 0 mixed.
FTZ use could lower import duties
If your business operates in Hanover or Lebanon, New Hampshire, Hypertherm filed to use Foreign-Trade Zone (FTZ) procedures to make plasma cutting parts and kits at its Subzone 81H facilities. The proposed finished products have duty rates ranging from 2.7% to 4.7%, and the listed foreign components (tellurium copper rods, oxygen-free high thermal conductivity rods, precision cut hafnium) have duty rates ranging from 1.6% to 4.0%; some materials may be subject to Section 122, Section 232, or Section 301 and must be admitted in privileged foreign (PF) status under 19 CFR 146.41. Public comments on the proposal are due by May 5, 2026.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-20774, Foreign-Trade Zone (FTZ) 16, Notification of Proposed Production Activity; Yazaki North America, Inc.; (Stamped Copper Terminals); Petoskey, Michigan
Yazaki North America wants to start making stamped copper terminals at their Petoskey, Michigan plant using special foreign materials with lower or no import duties. This change could save money on materials like copper and steel alloys, but some parts still face tariffs. People have until November 18, 2026, to share their thoughts before the plan gets the green light.
2026-20775, Foreign-Trade Zone (FTZ) 40, Notification of Proposed Production Activity; Norman Noble Company Inc.; (Implantable Medical Devices); Highland Heights, Ohio
Norman Noble Company in Highland Heights, Ohio, wants to start making implantable medical devices using some imported materials with special trade benefits under Foreign-Trade Zone 40. This move could save money on import duties for parts like tungsten plates and stainless steel tubes. Public comments are open until November 18, 2026, so anyone interested can share their thoughts before the plan moves forward.
2026-20776, Foreign-Trade Zone (FTZ) 50, Notification of Proposed Production Activity; Sanyo Denki America, Inc.; (Cooling, Servo, and Power Systems and Assemblies); Torrance, California
Sanyo Denki America in Torrance, California, wants to start making cooling, servo, and power system parts inside Foreign-Trade Zone 50. This means they can use certain imported materials with lower or no import taxes, helping them save money and speed up production. The government is reviewing this plan, which could boost local manufacturing and keep prices competitive.
2026-20253, Foreign-Trade Zone (FTZ) 75; Authorization of Production Activity; Essai, Inc.; (Semiconductor Test Equipment); Chandler, Arizona
Essai, Inc. in Chandler, Arizona, got the green light to make semiconductor test equipment inside Foreign-Trade Zone 75. This means they can produce their high-tech gear with special trade benefits, helping them save money and speed up operations. The approval was finalized on September 28, 2026, so Essai can start or continue their work without any extra delays.
2026-20254, Foreign-Trade Zone (FTZ) 45; Authorization of Limited Production Activity; Qorvo US, Inc.; (Semiconductor Wafers and Modules); Hillsboro, Oregon
Qorvo US, Inc. in Hillsboro, Oregon got the green light to start limited production of semiconductor wafers and modules in Foreign-Trade Zone 45. This means they can use some imported parts with special rules for two years, helping them save money and speed up manufacturing. The approval came after a careful review and public input, so it’s official and ready to roll!
2026-20261, Foreign-Trade Zone (FTZ) 153; Authorization of Limited Production Activity; CMS Circuits, Inc.; (Electronic Manufacturing Services in Aerospace, Industrial, and Medical Applications); Murrieta, California
CMS Circuits, Inc. in Murrieta, California, got the green light to start limited production of electronic parts for aerospace, industrial, and medical uses inside Foreign-Trade Zone 153. This means they can bring in certain fiber optic bundles under special foreign status, but only for two years. The City of San Diego and local businesses will benefit from this move, which could boost local manufacturing and trade.
Previous / Next Documents
Previous: 2026-05879, Foreign-Trade Zone (FTZ) 164, Notification of Proposed Production Activity; Webco Industries, Inc.; (Steel Tubing); Kellyville, Oklahoma
Webco Industries in Kellyville, Oklahoma wants to start making steel tubing using special foreign materials under a Foreign-Trade Zone (FTZ) to save on import duties. This change could lower costs by reducing taxes on certain steel parts, with public comments open until May 5, 2026. If approved, Webco can produce welded stainless and nickel alloy steel tubing more efficiently and affordably.
Next: 2026-05881, Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company
Some folks want to buy shares in banks or bank companies, and the Federal Reserve is checking their applications to make sure everything’s fair and safe. If you want to share your thoughts, you’ve got until April 10, 2026, to speak up! This process helps keep banks strong and protects everyone’s money.