CPSC Updates Safety Rules for Toddler Beds Nationwide
Published Date: 5/14/2026
Rule
Summary
The Consumer Product Safety Commission is updating the safety rules for toddler beds to match the newest 2026 voluntary standard. This change affects manufacturers and sellers, ensuring toddler beds meet the latest safety tests starting August 29, 2026. No big costs are expected, but everyone should get ready for the new rules to keep little sleepers safe and sound.
Analyzed Economic Effects
6 provisions identified: 2 benefits, 3 costs, 1 mixed.
Toddler Beds Must Meet 2026 ASTM Standard
If you make or sell toddler beds, those products must comply with ASTM F1821-26, the revised voluntary standard that the CPSC incorporated by reference, effective August 29, 2026. The rule incorporates ASTM F1821-26 (approved February 1, 2026) and applies to products manufactured after August 29, 2026.
Third-Party Testing Still Required
Toddler beds are children's products, so manufacturers and importers must base certifications on tests by CPSC-accepted third party conformity assessment bodies. This certification requirement continues under section 14(a) of the CPSA.
Testing Protocols and Labs Remain the Same
ASTM F1821-26 did not change testing requirements, equipment, or protocols, so CPSC-accepted labs that tested to ASTM F1821-19 remain competent to test to ASTM F1821-26 and are expected to update accreditation scopes during normal renewals.
Labeling Paperwork Stays Unchanged
The revision does not change marking, labeling, or instructional literature requirements; the information collection remains approved under OMB Control Number 3041-0159. Existing paperwork obligations for toddler beds continue unchanged.
Federal Standard Will Preempt State Rules
Once ASTM F1821-26 becomes the CPSC mandatory standard on August 29, 2026, that federal standard will preempt state or local requirements dealing with the same risk of injury unless the state requirement is identical to the Federal standard, under section 26(a) of the CPSA.
Effective Date and Applicability Clarified
ASTM F1821-26 takes effect as the mandatory CPSC standard on August 29, 2026 (180 days after CPSC received notice on March 2, 2026), and the rule will apply to products manufactured after that effective date.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-12749, Safety Standard for Lithium-Ion Batteries Used in Micromobility Products and Electrical Systems of Micromobility Products Containing Such Batteries
The Consumer Product Safety Commission wants to make lithium-ion batteries in micromobility products (like e-scooters and e-bikes) safer to prevent fires and injuries. They’re proposing new rules that require these batteries to meet tougher safety standards and, for kids’ products, to pass special third-party testing. If you have thoughts, you’ve got until August 24, 2026, to speak up—these changes could mean safer rides and possibly some new costs for makers.
2026-19748, Agency Information Collection Activities; Extension of Collection; Standard for the Flammability of Clothing Textiles, 16 CFR Part 1610; Standard for the Flammability of Vinyl Plastic Film, 16 CFR Part 1611
The Consumer Product Safety Commission is extending its approval to collect info from clothing and vinyl plastic film makers to keep fire safety standards strong. This means manufacturers and importers must keep following the rules to make sure their products aren’t flammable. Comments on this extension are open until October 28, 2026, but no changes or extra costs are expected.
2026-19750, Agency Information Collection Activities; Extension of Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery
The Consumer Product Safety Commission wants to keep collecting feedback on how well they serve the public and is asking for your thoughts on extending this effort. This helps them improve their services without adding extra paperwork. If you have ideas or concerns, send them in by November 27, 2026!
2026-19579, Substantial Product Hazard List: Amendments to Requirements for Window Covering Cords
The Consumer Product Safety Commission wants to make certain window covering cords a big safety concern because they can cause strangulation. This affects makers and sellers of custom and stock window coverings with long or looped cords, requiring new warnings and safer designs. Comments on these changes are open until November 23, 2026, so businesses should get ready to update their products and stay safe!
2026-18103, Notice of Availability and Request for Comment: Revision to the Voluntary Standard for Products Containing Button Cell or Coin Batteries
The Consumer Product Safety Commission wants your thoughts on a new update to safety rules for products with button cell or coin batteries—those tiny power packs in toys, watches, and gadgets. This update could make these products safer, and companies making or selling them should pay attention. You’ve got until September 17, 2026, to share your comments, so don’t miss out on shaping safer battery products!
2026-16614, Regulatory Agenda
In this document, the Commission publishes its regulatory flexibility agenda. Information in this agenda was accurate as of November 2025 when the Commission prepared this agenda.
Previous / Next Documents
Previous: 2026-09625, Safety Zone; Gulf Intracoastal Waterway; Florida Avenue Bridge; Temporary Waterway Closure
The Coast Guard is temporarily closing part of the Gulf Intracoastal Waterway near the Florida Avenue Bridge from May 5 to May 22, 2026, because of a sewage leak. Boats and people can’t enter this area unless they get special permission, keeping everyone safe and the environment protected. This closure might cause some delays for boaters but helps avoid bigger problems.
Next: 2026-09656, Amendment of Class C Airspace and Class E Airspace; Palm Beach International Airport, West Palm Beach, FL
The FAA is updating the airspace rules around Palm Beach International Airport by changing the airport’s name to President Donald J. Trump International Airport. This update won’t affect flight paths, altitudes, or rules—just the name. The change takes effect on July 9, 2026, and won’t cost anyone extra or cause delays.