BASF Seeks Trade-Zone Savings for Huntsville Emissions Catalyst Production
Published Date: 6/25/2026
Notice
Summary
BASF Mobile Emissions Catalysts in Huntsville, Alabama, wants to make special catalyst products using certain imported materials with lower or no duties through Foreign-Trade Zone 83. This change helps BASF save money on taxes for specific parts and products starting soon after approval. It mainly affects BASF and their suppliers, boosting local production while cutting costs.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 1 costs, 1 mixed.
Specified Finished Catalysts Enter Duty-Free
BASF’s proposed finished products — listed as coated ceramic catalysts with precious metals, coated ceramic catalysts, and metallic catalysts — are identified in the filing as duty-free when admitted under the Foreign-Trade Zone procedures. This applies to those specific finished products if the Board authorizes the production activity.
Input Material Duty Rates Vary (0%–6.5%)
The filing lists many foreign-status inputs (for example: ceramic substrates; precious metals solutions of platinum, rhodium, and palladium; aluminum oxide; titanium dioxide) that are proposed for use in production and states applicable duty rates range from duty-free to 6.5%. That means some imported inputs would enter with no duty while others could carry duties up to 6.5% when used in the FTZ production.
Certain Inputs Must Be Admitted in Privileged Status
The notice states some materials/components are subject to duties under section 122, section 232, or section 301 depending on country of origin, and those decisions require such merchandise to be admitted to FTZs in privileged foreign status under 19 CFR 146.41. That means those specific inputs will have to follow the privileged admission rules specified by those trade actions.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-21561, Foreign-Trade Zone (FTZ) 186, Notification of Proposed Production Activity; Pratt & Whitney, a Division of RTX Corporation; (Aircraft Engines, Engine Modules, and Parts); North Berwick, Maine
Pratt & Whitney, part of RTX Corporation, wants to make aircraft engines and parts at their North Berwick, Maine facility inside Foreign-Trade Zone 186. This means they can use certain imported materials with special trade benefits, helping them save money and speed up production. The government got their request on October 14, 2026, and is reviewing it now.
2026-21548, Foreign-Trade Zone (FTZ) 64, Notification of Proposed Production Activity; Metal Container (MCC) LP; (Beverage Containers); Jacksonville, Florida
Metal Container (MCC) LP in Jacksonville wants to make empty aluminum beverage cans using imported aluminum stock under special Foreign-Trade Zone rules. This move could save them money on import duties, but public comments are open until December 1, 2026. If approved, this helps MCC keep costs down while making cans right here in Florida!
2026-21552, Foreign-Trade Zone (FTZ) 71, Notification of Proposed Production Activity; Pratt & Whitney, a Division of RTX Corporation; (Aircraft Engines, Engine Modules, and Parts); Middletown, Connecticut
Pratt & Whitney, part of RTX Corporation, wants to start making aircraft engines and parts at their Middletown, Connecticut facility inside Foreign-Trade Zone 71. This move lets them use special trade rules to save money and speed up production. The government is reviewing their plan, which was submitted on October 14, 2026, and if approved, it could boost local manufacturing and cut costs.
2026-21534, Foreign-Trade Zone (FTZ) 244, Notification of Proposed Production Activity; Metal Container (MCC) LP; (Beverage Containers); Riverside and Jurupa Valley, California
Metal Container (MCC) LP wants to start making empty beverage cans and aluminum lids at their Riverside and Jurupa Valley sites under special Foreign-Trade Zone rules. This means they can use imported aluminum materials with lower or delayed duties, saving money and speeding up production. Public comments are open until December 1, 2026, so anyone interested can share their thoughts before the plan moves forward.
2026-21555, Foreign-Trade Zone (FTZ) 123, Notification of Proposed Production Activity; Metal Container (MCC) LP; (Beverage Containers); Windsor, Colorado
Metal Container (MCC) LP wants to start making empty beverage cans in Windsor, Colorado, using aluminum that comes from other countries. This change could save them money on import duties thanks to special Foreign-Trade Zone rules. People have until December 1, 2026, to share their thoughts before the plan moves forward.
2026-21542, Foreign-Trade Zone (FTZ) 26, Notification of Proposed Production Activity; Pratt & Whitney, a Division of RTX Corporation; (Aircraft Engines, Engine Modules, and Parts); Midland, Georgia
Pratt & Whitney, part of RTX Corporation, wants to start making aircraft engines and parts at their Midland, Georgia facility inside Foreign-Trade Zone 26. This move lets them use certain imported materials with special trade benefits, helping them save money and speed up production. The government got their request on October 14, 2026, and is reviewing it now.
Previous / Next Documents
Previous: 2026-12773, Foreign-Trade Zone (FTZ) 72; Authorization of Production Activity; iwis drive systems, LLC; (Customized Parts and Drive System Components); Whitestown, Indiana
iwis drive systems, LLC in Whitestown, Indiana, got the green light to make customized parts and drive system components in their Foreign-Trade Zone. This means they can produce these items with special trade benefits, helping them save money and speed up operations. The approval was finalized on June 22, 2026, so the company can start or continue production without extra delays.
Next: 2026-12775, Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Comment Request; GEAR UP Application Packages for Partnership and State Grants
The Department of Education is updating the forms for GEAR UP grants that help states and local groups support students preparing for college. This affects state, local, and tribal governments who apply for these grants, with about 156 applications expected yearly. Comments on the changes are open until July 27, 2026, and the update aims to make the process clearer and less time-consuming.