Alaska Administrative Code

(a) No person may drive a motor vehicle which is not equipped with a windshield, nor may a person drive a motor vehicle equipped with a defective windshield or windows which obstructs, obscures or impairs the driver's view. This section does not require a windshield as equipment …

(a) No vehicle may be driven upon a highway or a vehicular way or area with loose or defective wheels or steering assembly which constitutes a hazard. (b) No vehicle may be driven upon a highway or vehicular way or area with sharp protuberances, or with fenders, bumpers or other …

(a) No person may drive or move on a highway a motor vehicle or trailer having a metal tire in contact with the roadway. (b) No tire on a vehicle moved on a highway may have on its periphery a protuberance of a material other than rubber which projects beyond the tread of the tra…

Notes 13 AAC 04.235 Repealed 6/28/79.

(a) Except as provided in (c) of this section, no person may drive a truck, bus, truck-tractor or a motor vehicle towing a mobile home or pole trailer upon a highway outside the corporate limits of a municipality unless there is carried in the vehicle the following equipment:(1) …

(a) When a vehicle described in sec. 240(a) of this chapter is disabled, stopped, or parked on a shoulder of a highway outside a municipality in a manner which presents a hazard to traffic, and at a time when lights are required to be illuminated under sec. 10 of this chapter, th…

(a) Every school bus used for pupil transportation must be painted National School Bus Chrome Yellow (National Bureau of Standards Color #1305). No other vehicle may display this color. A bus originally painted and used as a school bus which is no longer used as a school bus must…

A vehicle using compressed gas as a fuel must (1) vent the fuel storage compartment at the lowest points; and (2) display, clearly and legibly, an approved sign or decal maintained in good condition and mounted on the outside of the fuel storage compartment bearing the words "COM…

(a) Every animal-driven vehicle and implement of husbandry or combination of these vehicles designed for or driven at speeds less than 25 miles per hour must be equipped with a slow-moving-vehicle emblem mounted on the rear, except that (1) when the towed unit or a load on the to…

(a) In this section, "air-conditioning equipment" means mechanical vapor compression refrigeration equipment used to cool the driver or passenger compartment of a motor vehicle. (b) Air-conditioning equipment must be manufactured, installed, and maintained with regard for the saf…

When a motor vehicle is equipped with an emission-control system or when a motor vehicle is required by a statute or regulation to have an emission-control system, the system must be maintained in good working order. Notes 13 AAC 04.257 Eff. 6/28/79, Register 70 Authority:AS 28.0…

(a) A motor vehicle driven in this state may not be equipped with television-type receiving equipment located where the viewer or screen is visible from the driver's seat. (b) A driver of a motor vehicle may not wear a headset, headphones, or other headgear designed for receiving…

(a) No person may drive a motor vehicle unless it has a device which effectively reduces the wheel spray or splash of water or other substance to the rear of the vehicle. (b) The device required in (a) of this section must be installed and maintained so that the device placed beh…

(a) A passenger car manufactured or assembled after January 1, 1965, must be equipped with lap belt assemblies for use in the driver's and one other front seat position. A motor vehicle manufactured or assembled after January 1, 1968, except a motorcycle or off-highway vehicle, m…

Motor vehicles used to transport prisoners, by state or municipal authorities, are exempt from the safety belt requirement under AS 28.05.095, due to the physical conditions of those being transported. Notes 13 AAC 04.271 Eff. 12/20/2002, Register 164 Authority:AS 28.05.011 AS 28…

If a motor vehicle was equipped, when assembled, with bumpers or other collision energy absorption or attenuation system, the system must be maintained in good operating condition, and no person may remove, disconnect, cause or knowingly permit the removal or disconnection of a p…

(a) A vehicle towed upon a street or highway must be coupled to its towing vehicle by means of a safety chain, chains, cable or equivalent device, in addition to the regular hitch or coupling. No additional connecting device may contain more slack than is necessary to permit prop…

Notes 13 AAC 04.280 Repealed 6/28/79.

Notes 13 AAC 04.285 Repealed 6/28/79.

Notes 13 AAC 04.290 Repealed 6/28/79.

Notes 13 AAC 04.295 Repealed 6/28/79.

Notes 13 AAC 04.300 Repealed 6/28/79.

Notes 13 AAC 04.305 Repealed 6/28/79.

Notes 13 AAC 04.310 Repealed 6/28/79.

(a) A motorcycle must be equipped with multi-beam road-lighting equipment meeting the requirements of 13 AAC 04.020(a) and (e). (b) A motor-driven cycle must have at least one headlight mounted at a height of not more than 54 inches and not less than 24 inches, and of sufficient …

(a) A motorcycle or motor-driven cycle must have at least one taillight meeting the illumination requirements of 13 AAC 04.010, mounted at a height of not more than 72 inches nor less than 15 inches. A bicycle must be equipped with a taillight which displays a red light visible 5…

(a) A motorcycle or motor-driven cycle must be equipped with at least one stop light meeting the requirements of 13 AAC 04.035(c). (b) Except for a motorcycle or a motor-driven cycle manufactured or assembled before January 1, 1980, a motorcycle or motor-driven cycle must be equi…

(a) A motorcycle or motor-driven cycle must be equipped on the rear, either as part of the taillight or separately, with at least one red reflector meeting the requirements of 13 AAC 04.030(a). (b) Every bicycle, when ridden at the time when lights are required under 13 AAC 04.01…

(a) A motorcycle or motor-driven cycle must be equipped with a service braking system which will stop the vehicle within 25 feet from an initial speed of 20 miles per hour on a level, dry, clear, hard surface. A motorcycle or motor-driven cycle must comply with applicable motor v…

(a) A motorcycle or motor-driven cycle carrying a passenger, other than in a sidecar or enclosed cab, must be equipped with handgrips and footrests for each passenger. (b) A person may not drive a motorcycle or motor-driven cycle with handlebars higher than the shoulder height of…

(a) Except as otherwise provided by statute, a person operating or riding upon a motorcycle or motor-driven cycle upon a public roadway must wear protective headgear that complies with standards of the United States American National Standard Institute Safety Code Z 90.1 - 1971, …

(a) Every motor-driven cycle and bicycle must be equipped as required by the applicable provisions of 13 AAC 04.210, 13 AAC 04.220, 13 AAC 04.230, and 13 AAC 04.257. (b) A motorcycle or motor-driven cycle windshield must rise 15 inches above the highest point of the handlebars or…

(a) A snowmobile, all-purpose vehicle, or other off-highway vehicle which is driven during the times when lights are required by 13 AAC 04.010 must be equipped with at least one headlight, aimed and of sufficient intensity to reveal persons and vehicles at a distance of at least …

A snowmobile, all purpose-vehicle, or other off-highway vehicle must be equipped with brakes which will control the movement, stop, and hold the vehicle under normal driving conditions on any grade upon which it normally may be driven, and under all conditions of loading. Notes 1…

A snowmobile, all purpose-vehicle, or other off-highway vehicle operated by hand or foot controls must be equipped with a throttle or idle spring in good working condition which, when released, will return the engine speed to idle, close the carburetor, and disengage the clutch. …

(a) A snowmobile, all-purpose vehicle, or other off-highway vehicle must be equipped with a carburetor intake, exhaust muffler, and an emission-control system in good working order, and may not use a muffler cutout, bypass or other similar device. (b) An exception to the requirem…

(a) The following equipment is required on a snowmobile, all-purpose vehicle, or other off-highway vehicle: (1) a rear snowflap installed to deflect downward a cleat or other object or material which may be thrown by the track or wheels; (2) a protective shield over all moving pa…

Notes 13 AAC 05.010 Eff. 3/14/93, Register 125; am 2/27/97, Register 141; repealed 11/16/2004, Register 172

Notes 13 AAC 05.020 Eff. 3/14/93, Register 125; am 10/1/94, Register 131; am 2/7/97, Register 141; repealed 11/16/2004, Register 172

Notes 13 AAC 05.030 Eff. 3/14/93, Register 125; am 10/1/94, Register 131; repealed 11/16/2004, Register 172

Notes 13 AAC 05.090 Eff. 3/14/93, Register 125; repealed 11/16/2004, Register 172

Notes 13 AAC 06.010 Eff. 7/5/75, Register 54; repealed 10/1/94, Register 131

Notes 13 AAC 06.020 In effect before 7/28/59; am 12/15/61, Register 3; am 8/10/66, Register 22; am 12/31/69, Register 31; am 7/5/75, Register 54; repealed 10/1/94, Register 131

Notes 13 AAC 06.030 In effect before 7/28/59; am 12/15/61, Register 3; am 8/10/66, Register 22; am 12/31/69, Register 31; am 7/5/75, Register 54; repealed 10/1/94, Register 131

Notes 13 AAC 06.040 Eff. 12/31/69, Register 31; am 7/5/75, Register 54; repealed 10/1/94, Register 131

Notes 13 AAC 06.050

Notes 13 AAC 06.060 Annulled under AS 44.62.320, passed 5/26/76.