(a) The holder of a class three permit:(1) May fill, sell, and deliver ICC/DOT cylinders and ASME motor fuel cylinders only;(2) May establish cylinder exchange stations, deliver filled cylinders to ICC/DOT cylinder and ASME cylinder exchange stations, and service cylinders throughout the state; (3) Must pay an annual permit fee in the sum of one hundred dollars ($100); and(4) Must provide liquefied petroleum gas for the cylinders by the following method:(A) Furnish a storage container to be located in Arkansas, with a capacity of not one thousand gallons (1,000 gals.), unless the Liquefied Petroleum Gas Board authorizes a smaller container, in connection with the proper type filling facilities; and(B) Cylinders, not to exceed thirty gallons (30 gals.), must be filled by weight or other approved method only at cylinder filling facilities approved by the board.
(1) May fill, sell, and deliver ICC/DOT cylinders and ASME motor fuel cylinders only;
(2) May establish cylinder exchange stations, deliver filled cylinders to ICC/DOT cylinder and ASME cylinder exchange stations, and service cylinders throughout the state;
(3) Must pay an annual permit fee in the sum of one hundred dollars ($100); and
(4) Must provide liquefied petroleum gas for the cylinders by the following method:(A) Furnish a storage container to be located in Arkansas, with a capacity of not one thousand gallons (1,000 gals.), unless the Liquefied Petroleum Gas Board authorizes a smaller container, in connection with the proper type filling facilities; and(B) Cylinders, not to exceed thirty gallons (30 gals.), must be filled by weight or other approved method only at cylinder filling facilities approved by the board.
(A) Furnish a storage container to be located in Arkansas, with a capacity of not one thousand gallons (1,000 gals.), unless the Liquefied Petroleum Gas Board authorizes a smaller container, in connection with the proper type filling facilities; and
(B) Cylinders, not to exceed thirty gallons (30 gals.), must be filled by weight or other approved method only at cylinder filling facilities approved by the board.
(b) The storage container furnished by the class three permit must be inspected and approved by the board prior to its first use in the class three operation and once annually thereafter.
(c) When any cylinder exchange station location changes status from active to inactive or inactive to active the class three permit holder must notify the board within thirty (30) days after the change of status.
(d) The applicant for a class three permit:(1) Must furnish evidence of the following insurance: (A) | Manufacturers’ and Contractors’ | Each Person | $500,000 Bodily Injury Liability | Each Accident | 500,000 Insurance (B) | Manufacturers’ and Contractors’ | Each Accident | $500,000 Property Damage Liability | Aggregate | 500,000 Insurance (C) | Products Bodily Injury | Each Person | $500,000 Liability Insurance | Each Accident | 500,000 Aggregate | 500,000 (D) | Products Property Damage | Each Accident | $500,000 Liability Insurance | Aggregate | 500,000 (2) Must provide full-time employment of qualified personnel whose competency shall be proved through a current written or oral examination; and(3) Must comply with all other applicable requirements.
(1) Must furnish evidence of the following insurance: (A) | Manufacturers’ and Contractors’ | Each Person | $500,000 Bodily Injury Liability | Each Accident | 500,000 Insurance (B) | Manufacturers’ and Contractors’ | Each Accident | $500,000 Property Damage Liability | Aggregate | 500,000 Insurance (C) | Products Bodily Injury | Each Person | $500,000 Liability Insurance | Each Accident | 500,000 Aggregate | 500,000 (D) | Products Property Damage | Each Accident | $500,000 Liability Insurance | Aggregate | 500,000
(A) | Manufacturers’ and Contractors’ | Each Person | $500,000 Bodily Injury Liability | Each Accident | 500,000 Insurance (B) | Manufacturers’ and Contractors’ | Each Accident | $500,000 Property Damage Liability | Aggregate | 500,000 Insurance (C) | Products Bodily Injury | Each Person | $500,000 Liability Insurance | Each Accident | 500,000 Aggregate | 500,000 (D) | Products Property Damage | Each Accident | $500,000 Liability Insurance | Aggregate | 500,000
(2) Must provide full-time employment of qualified personnel whose competency shall be proved through a current written or oral examination; and
(3) Must comply with all other applicable requirements.