0 chapters · 949 sections in this title.
Lab. Code § 7261 Section 7261
0.3K chars
When gathering and stacking temporary floor plank on a lower floor, in preparation for transferring such plank for use on an upper working floor, the steel erector’s personnel shall remove such plank successively, working toward the last panel of such floor, so that the work is a…
Lab. Code § 7262 Section 7262
0.2K chars
When gathering and stacking temporary floor planks from the last panel, the steel erector’s personnel assigned to such work shall be protected by safety belts with life lines attached to a catenary line or other substantial anchorage.
Lab. Code § 7263 Section 7263
0.3K chars
The sequence of erection, bolting, temporary guying, riveting and welding shall be such as to maintain the stability of the structural frame at all times during construction. This applies to the dead weight of the structure, plus weight and working reactions of all construction e…
Lab. Code § 7264 Section 7264
0.1K chars
Where a building is being constructed in sections, each section constitutes a building as defined in Section 7250.
Lab. Code § 7265 Section 7265
0.3K chars
Safety belts and nets shall be required in accordance with Article 24 (commencing with Section 1669) of subchapter 4 of Chapter 4 of Part 1 of Title 8 of the California Administrative Code, Construction Safety Orders of the Division of Occupational Safety and Health.
Lab. Code § 7266 Section 7266
0.3K chars
No person shall proceed with any work assigned to or undertaken by him, or require or permit any other person to proceed with work assigned to or undertaken by either, unless the planking or nets required by this article are in place. Violation of this section is a misdemeanor.
Lab. Code § 7267 Section 7267
0.1K chars
The Division of Occupational Safety and Health shall enforce this article.