Sec. 2.5. (a) "Advanced recycling" means a manufacturing process for the conversion of post-use polymers and recovered feedstocks into basic raw materials, feedstocks, chemicals, and other products through processes that include: (1) pyrolysis; (2) gasification; (3) depolymerization; (4) catalytic cracking; (5) reforming; (6) hydrogenation; (7) solvolysis; (8) chemolysis; and (9) other similar technologies. (b) "Advanced recycling" does not include the following: (1) Incineration of plastics or waste to energy processes. (2) Solid waste processing. (3) Solid waste recovery. (4) Treatment of a waste. As added by P.L.54-2023, SEC.1.
IC 13-11-2-2.6 "Advanced recycling facility" Sec. 2.6. (a) "Advanced recycling facility" means a manufacturing facility that: (1) receives, stores, and converts post-use polymers and recovered feedstocks resulting from advanced recycling; and (2) is subject to manufacturing regulation by the department for any of the following: (A) Air. (B) Water. (C) Waste. (D) Land use. (b) The term does not include any of the following: (1) A final disposal facility. (2) An incinerator. (3) A solid waste disposal facility. (4) A solid waste management facility. (5) A solid waste processing facility. (6) A solid waste recovery facility. (7) A solid waste-to-energy facility. (c) Recycled products produced at an advanced recycling facility include: (1) monomers; (2) oligomers; (3) plastics; (4) plastics and chemical feedstocks; (5) basic and unfinished chemicals; (6) waxes; (7) lubricants; (8) coatings; and (9) adhesives. As added by P.L.54-2023, SEC.2.