Missouri Administrative Code

1994. Emergency rule filed Jan. 5, 1994, effective Jan. 18, 1994, PURPOSE: This rule establishes definitions for this chapter. expired Jan. 30, 1994. Original rule filed Sept. 1, 1993, effective Jan. 31, 1994. Emergency amendment filed March 18, 1996, effective (1) For purposes o…

Internal Control Standards (MICS). The individual chapters that PURPOSE: This rule establishes the objectives of an internal con- comprise the MICS are established by individual regulations in trol system. this chapter. (1) Each Class B licensee and other licensees as directed by…

System that the licensee’s written system has been reviewed by the accountant and complies with the requirements of section (1) PURPOSE: This rule establishes the procedure for approval of in- of this rule. ternal control system. (4) The commission shall review each submission re…

Requirements here. The Minimum Internal Control Standards may also be ac- cessed at http://www.mgc.dps.mo.gov. PURPOSE: This rule establishes the process if licensee fails to com- ply with internal control system. (1) The commission shall adopt and publish minimum stan- dards for…

(MICS)—Chapter C 28, 2015. Amended: Filed Oct. 27, 2016, effective June 30, 2017. Amended: Filed Jan. 20, 2022, effective Sept. 30, 2022. Amended: PURPOSE: This rule establishes the internal controls for Chapter C Filed Sept. 1, 2022, effective March 30, 2023. of the Minimum Inte…

(MICS)—Chapter D lished by the Missouri Gaming Commission, 3417 Knipp Dr., PO Box 1847, Jefferson City, MO 65102 and which may be accessed PURPOSE: This rule establishes the minimum internal control at http://www.mgc.dps.mo.gov. Chapter E does not incorporate standards for live t…

(MICS)—Chapter F 313.805, 313.812, 313.817, and 313.830, RSMo Supp. 2014.* Original rule filed March 28, 2013, effective Nov. 30, 2013. Emergency PURPOSE: This rule establishes the internal controls for Chapter F amendment filed July 31, 2014, effective Aug. 28, 2014, expired of …

(MICS)—Chapter G Original rule filed Oct. 31, 2011, effective June 30, 2012. Emergency amendment filed July 31, 2014, effective Aug. 28, 2014, expired PURPOSE: This rule establishes the internal controls for Chapter G Feb. 26, 2015. Amended: Filed July 31, 2014, effective Feb. 28…

shall be made available to the public for inspection and copying (MICS)—Chapter H at no more than the actual cost of reproduction. This note applies only to the reference material. The entire text of the rule is printed PURPOSE: This rule establishes the internal controls for Cha…

(1) The commission shall adopt and publish minimum standards (MICS)—Chapter I for internal control procedures that in the commission’s opinion satisfy 11 CSR 45-9.020, as set forth in Minimum Internal PURPOSE: This rule establishes the minimum internal control Control Standards (…

ment filed July 31, 2014, effective Aug. 28, 2014, expired Feb. 26, (MICS)—Chapter J 2015. Amended: Filed July 31, 2014, effective Feb. 28, 2015. PURPOSE: This rule establishes the internal controls for Chapter J *Original authority: 313.004, RSMo 1993, amended 1994; 313.800, RSM…

(MICS)—Chapter M AUTHORITY: section 313.004, RSMo 2000, and sections 313.800 and 313.805, RSMo Supp. 2011.* Original rule filed June 30, 2010, PURPOSE: This rule establishes the minimum internal control effective Jan. 30, 2011. Amended: Filed Aug. 25, 2011, effective standards fo…

and 313.805, RSMo Supp. 2009.* Original rule filed May 27, 2010, (MICS)—Chapter N effective Dec. 30, 2010. PURPOSE: This rule establishes the minimum internal control *Original authority: 313.004, RSMo 1993, amended 1994; 313.800, RSMo 1991, standards for security. amended 1993, …

(MICS)—Chapter Q dps.mo.gov. Chapter R does not incorporate any subsequent amendments or additions. PURPOSE: This rule establishes the minimum internal control standards for Disassociated Persons. AUTHORITY: sections 313.004 and 313.817, RSMo 2016, and sec- tions 313.800, 313.805…

(MICS)—Chapter T effective Sept. 30, 2022. Amended: Filed Dec. 5, 2024, effective July 30, 2025. PURPOSE: This rule establishes the internal controls for Chapter T *Original authority: 313.004, RSMo 1993, amended 1994, 2014; 313.800, RSMo of the Minimum Internal Control Standards…

(MICS)—Chapter W PURPOSE: This rule establishes the internal controls for Chapter W of the Minimum Internal Control Standards. PUBLISHER’S NOTE: The secretary of state has determined that publication of the entire text of the material that is incorporated by reference as a portio…

ings (3) No licensee shall file any frivolous any hearing. (Rescinded July 30, 2018) appeal. If the commission determines that an appeal is frivolous, they may find a further (3) The executive director may designate an AUTHORITY: sections 313.540, 313.650.2 violation of the rules…

28, 1995. AUTHORITY: sections 313.650.2 and of the Judges 313.650.3, RSMo 1986.* This rule originally (Rescinded July 30, 2018) filed as 12 CSR 50-90.040. Emergency rule *Original authority: 313.540, RSMo 1986; and 313.650, RSMo 1986. filed July 18, 1986, effective July 28, 1986,…

of the Commission Staff to 11 CSR 45-90.030, effective Aug. 28, and to denominate failure to appear without 1995. Rescinded: Filed Dec. 7, 2017, effec- good cause as a waiver of hearing. PURPOSE: This rule provides for an appeal tive July 30, 2018. to the commission from a decisi…

the subject of a different request for hearing to 11 CSR 45-90.070, effective Aug. 28, 1995. PURPOSE: This rule provides for notice of under these rules to avoid needless duplica- hearings. tion and additional expense to the parties. *Original authority: 313.650, RSMo 1986. The e…

and Stipulations conclusions of law or its determinations of (3) The director may issue orders after a pre- the issues in any hearing shall be closed to PURPOSE: This rule authorizes prehearing hearing conference concerning any subject the public to insure free consideration of a…

tions (573) 751-3313—751-3695 (night); (B) Troop A, P.O. Box 158, 504 E. Blue PURPOSE: This rule describes the organiza- Parkway, Lee’s Summit, MO 64063, (816) tion and methods of operation of the Missouri 524-1407—524-6200; State Highway Patrol. (C) Troop B, P.O. Box 247, Macon,…

equal to ten thousand pounds (10,000 lbs.); and Type A2, with a PURPOSE: This rule defines the meaning of words and terms used GVWR of greater than ten thousand pounds (10,000 lbs.). throughout the inspection rules. 2. A Type “B” school bus is constructed utilizing a stripped cha…

wheels to be suspended by lifting under the outer extremity of PURPOSE: This rule lists the minimum requirements for all official a motor vehicle’s lower control arm, cross member, or frame; vehicle inspection stations. These requirements are necessary to 5. Scraper. A scraper to…

effective March 19, 1970. Amended: Filed Nov. 9, 1971, effective PURPOSE: This rule provides different classifications of public Nov. 19, 1971. Amended: Filed May 21, 1974, effective May 31, 1974. inspection stations and lists the type vehicle each class of station is authorized …

operation. PURPOSE: This rule lists the vehicles that private inspection stations may inspect and other responsibilities that apply only to (4) When an inspection station permit has been suspended private stations. or revoked, or when a station discontinues operation, all inspect…

the time of application. PURPOSE: This rule requires inspection station operators and (B) The Missouri State Highway Patrol shall consider only inspector/mechanics to display inspection permits, the official business hours between the hours of 6 a.m. and 10 p.m. for sign, and pos…

Filed June 2, 1993, effective Nov. 8, 1993. Emergency rescission PURPOSE: This rule lists minimum requirements and licensing and rule filed March 12, 1997, effective April 15, 1997, expired Sept. procedures for inspector/mechanics. These requirements and 30, 1997. Rescinded and r…

ties, and Decals tion stickers and decals for the same number of current issue. A request to exchange stickers must be accompanied by a Return PURPOSE: This rule establishes uniform procedures for inspection Of Expired Stickers/Decals Form (SHP-466) properly completed stations to…

PURPOSE: This rule provides uniform procedures for the proper PURPOSE: This rule establishes uniform procedures for inspection use of the MVI-2 form. These procedures are necessary to ensure station operators and inspector/mechanics to follow when issuing that correct and complet…

PURPOSE: This rule advises inspection station operators and inspector/mechanics that compliance with the inspection law and the official inspection rules is required. A failure to comply subjects the inspection station operator or inspector/mechanic to a warning, suspension or re…

Rebuilding PURPOSE: This rule prescribes the form which shall be used when a vehicle is sold for junk, salvage, or for rebuilding and not inspected under the motor vehicle inspection regulations. This is a requirement of section 307.380, RSMo. (1) When a vehicle is sold for junk,…

Single unit vehicles PURPOSE: This rule describes the procedures and standards for with a manufacturer’s the inspection of brake performance. The inspection of brakes is a Gross Vehicle Weight requirement of section 307.365, RSMo. Rating of 10,000 pounds or less 43.5% 14 (1) A br…

five (125) psi; PURPOSE: This rule describes the procedures and standards for 4. Governor cut-in pressure is lower than eighty (80) psi; the inspection of air and vacuum brake systems. The inspection of 5. Leakage in psi per minute exceeds three (3) psi for single brakes is a req…

PURPOSE: This rule describes the procedures and standards for the inspection of lighting equipment. The inspection of lighting equipment is a requirement of section 307.365, RSMo. (1) Headlights. Every motor vehicle, other than a motorcycle, shall be equipped with one (1) of the …

PURPOSE: This rule describes the procedures and standards for the inspection of signalling devices. The inspection of signalling devices is a requirement of section 307.365, RSMo. (2) Beam Indicator. Every motor vehicle equipped with multiple (1) Turn Signals. Turn signals instal…

pivot shafts, pivot shaft mountings, radius arms, and all PURPOSE: This rule describes the procedures and standards for bushings. the inspection of steering mechanisms. The inspection of steering 1. Reject vehicle if— mechanisms is a requirement of section 307.365, RSMo. A. Wheel…

1998. Rescinded and readopted: Filed Aug. 1, 1997, effective Jan. PURPOSE: This rule describes the procedures and standards for the 30, 1998. inspection of the horn. The inspection of the horn is a requirement of section 307.365, RSMo. *Original authority: 307.360, RSMo 1967, ame…

(F) A casting is cracked or there is evidence of wear in the PURPOSE: This rule describes the procedures and standards for clamping area of a cast wheel; or the inspection of tires. The inspection of tires is a requirement of (G) A wheel and hub assembly are mismatched or if the …

(E) Tailpipe is located so that a person may be burned on PURPOSE: This rule describes the procedures and standards for the entering or leaving passenger compartment; inspection of wheels. The inspection of wheels is a requirement of (F) Any part of system passes through passenge…

Jan. 14, 1988. Amended: Filed Aug. 18, 1989, effective Nov. 26, 1989. PURPOSE: This rule describes the procedures and standards for the Amended: Filed April 2, 1992, effective Sept. 6, 1992. Amended: inspection of glazing. The inspection of glazing is a requirement of Filed June …

Aug. 23, 1970. Amended: Filed Nov. 9, 1971, effective Nov. 19, 1971. PURPOSE: This rule describes the procedures and standards for the Amended: Filed May 21, 1974, effective May 31, 1974. Amended: inspection of a vehicle’s fuel tank. The inspection of vehicle fuel Filed April 2, …

designed for installing that seat belt in a motor vehicle by the PURPOSE: This rule describes the procedures and standards for manufacturer or its equivalent. Seat belts are classified as: the inspection of mud flaps. The inspection of mud flaps is a (A) Type 1 seat belt assembly…

PURPOSE: This rule formulates procedures for the inspection of motor vehicle bumpers as required by section 307.172(2), RSMo. (1) Definitions. (A) Bumper—A device of at least four and one-half inches (4 1/2") in vertical height constructed of metal, wood or other durable material…

(F) Front and Rear Red Warning Flashers. School buses shall PURPOSE: This rule describes the procedures and standards for be equipped with two (2) alternately flashing red lights and the inspection of school buses. The inspection of school buses is a two (2) alternately flashing …

with physical disabilities may display the universal handicap PURPOSE: This rule establishes inspection standards for the symbols below the window line. The emblem shall meet inspection of power lifts, ramps, aisles, restraint systems, special United States Department of Transpor…