™Your Policy Risk Impact Agent
61 chapters · 464 sections in this title.
R.I. Gen. Laws § 6-39-1. Definitions
0.6K chars
For purposes of this chapter: (1) “Customer” means any individual or entity: (i) Who causes or caused a molder to fabricate, cast, or otherwise make a die, mold, or form; or (ii) Who causes or caused a molder to use a die, mold, or form to manufacture, assemble, or otherwise make…
R.I. Gen. Laws § 6-39-2. Provisions not applicable
0.2K chars
This chapter shall not apply where a molder retains title to and possession of a die, mold, or form. Nothing in this chapter shall be construed to grant a customer any rights, title, or interest to a die, mold, or form.
R.I. Gen. Laws § 6-39-3. Title to dies, molds, or forms by operation of law
0.7K chars
(a) Unless otherwise agreed in writing, if a customer does not take possession from the molder of a die, mold, or form in this state within three (3) years following the last prior use of it, all of the customer’s rights, title, and interest to the die, mold, or form may be trans…
R.I. Gen. Laws § 6-39-4. Notice required
0.6K chars
If a molder chooses to have all rights, title, and interest to any die, mold, or form transferred to the molder by operation of law, the molder shall send written notice by registered mail, return receipt requested, to the customer at the address, if any, indicated in the agreeme…
