Behind-the-wheel training requirements.

Utah Code § 53-3-505.5, under Part 53-3-5: Commercial Driver Training Schools Act.

Utah Code § 53-3-505.5

53-3-505.5. Behind-the-wheel training requirements.

(1) Except as provided under Subsection, a driver education course under this part or, that is used to satisfy the driver training requirement under Sectionshall require each student to complete at least six hours of behind-the-wheel driving a dual-control motor vehicle with a certified instructor seated in the front seat next to the student driver. (2) Title 53G, Chapter 10, Part 5, Driver Education Classes 53-3-204

(2) Up to three hours of the behind-the-wheel driving may be substituted as follows: two hours of range driving on an approved driving range under Sectionequals one hour of the behind-the-wheel driving required under Subsection; 53G-10-502 (1) two hours of driving simulation practice on a driving simulation device that is fully interactive as set forth in rules made under Section, equals one hour of the behind-the-wheel driving required under Subsection; and 53-3-505 (1) four hours of driving simulation practice on a driving simulation device that is not fully interactive as set forth in rules made under Section, equals one hour of the behind-the-wheel driving required under Subsection, with a maximum of one hour of the behind-the-wheel driving required under Subsectionthat may be substituted under this Subsection. 53-3-505 (1) (1) (2)(c)

(3) The behind-the-wheel driving required under Subsectionshall include, if feasible, driving on interstate and other multilane highways. (1)