Airbus A330s need part checks—FAA playing it safe again.
Published Date: 2/13/2025
Proposed Rule
Summary
The FAA wants Airbus A330 planes made since 2008 to get regular checks because a part wasn’t treated right during production. If problems show up, repairs will be needed to keep flights safe. Airlines must comment by March 31, 2025, and get ready for inspections that could cost time and money but keep passengers safe.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Detected cracks must be repaired before flight
If any cracking is detected during the inspections, the AD requires that the cracking be repaired before further flight using a method approved by the FAA Manager (AIR-520), EASA, or Airbus SAS's EASA Design Organization Approval (DOA).
Mandatory inspections for A330 splice fittings
If you operate certain Airbus A330 airplanes, you must perform repetitive detailed inspections of splice fittings at the front windshield side post (left and right, P/N F531-23024-200 and F531-23024-201). The inspections are required for affected A330-200, A330-200 Freighter, A330-300, A330-800, and A330-900 series airplanes because an incorrect shot peening application was implemented in production starting in 2008; you must follow the procedures in EASA AD 2024-0200 incorporated by reference.
FAA cost estimate for U.S. operators
The FAA estimates this proposed AD would affect 58 U.S.-registered airplanes. Estimated cost per airplane for the required inspection is $425 (5 work-hours at $85 per hour) with parts cost $0, for a total estimated cost on U.S. operators of $24,650.
Manufacturer may cover some compliance costs
The FAA notes the manufacturer has indicated that some or all costs of this proposed AD may be covered under warranty, which could reduce the cost impact on affected operators.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-02505, Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA wants to make sure certain Airbus Canada planes are super safe by checking their air ducts. Some ducts didn’t pass fire safety tests, so the FAA plans to inspect and add fire-resistant covers if needed. This rule affects specific BD-500 models and aims to keep passengers safe without causing big delays or costs. Comments are open until March 31, 2025.
Next: 2025-02525, Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA wants to update safety rules for ATR42 airplanes to keep them flying safely. If you own or work on these planes, you’ll need to follow new, stricter maintenance checks soon. Comments on these changes are open until March 31, 2025, so get ready to adjust your schedules and budgets!