Boeing 787s Need Stabilizer Inspections for Safety
Published Date: 3/28/2025
Rule
Summary
The FAA is requiring inspections on certain Boeing 787 airplanes to check for misaligned parts in the horizontal stabilizer, which helps keep the plane steady. If problems are found, fixes must be done to keep flights safe. This rule starts May 2, 2025, and affects airlines operating these models, helping prevent costly safety issues down the line.
Analyzed Economic Effects
4 provisions identified: 2 benefits, 2 costs, 0 mixed.
Inspections required for Boeing 787 stabilizers
If you fly on a Boeing Model 787-8, 787-9, or 787-10, the FAA requires inspections of the left and right horizontal stabilizer pivot pin assemblies for misalignment and incorrect gapping. The rule is effective May 2, 2025, and requires on-condition fixes (including replacement of the pivot pin assembly) when misalignment or incorrect gapping is found.
Estimated inspection and replacement costs for operators
The FAA estimates the inspection takes 2 work-hours at $85 per hour (cost $170 per airplane) and the AD affects 145 U.S.-registered Boeing 787 airplanes for a total estimated inspection cost to U.S. operators of $24,650. If a replacement is required based on inspection results, the FAA estimates a replacement cost of $48,750 per airplane (parts $47,730 plus labor $1,020).
Compliance timing: inspections due within 32 months
Operators must comply with the AD within the times specified in the Boeing Requirements Bulletin, and the FAA determined a 32-month compliance time will ensure safety. The AD is effective May 2, 2025, and the AD requires using that effective date where the bulletin refers to its Issue 001 date.
FAA corrected errors in Boeing service bulletin
The FAA issued exceptions to the Boeing Requirements Bulletin to correct errors: it changes Task 5 flag notes [1] and [3] wording from "right side" to "left side," updates the trap fitting part number in Task 6 Step 15 to 313Z6455-501, and removes the antirotation plate part number specification for Tasks 5–8 (replaced with "-"), as set out in paragraphs (h)(2)–(h)(4) of the AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-05294, Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is requiring certain Airbus Canada BD-500-1A10 and BD-500-1A11 planes to get checked for tight spaces between fire extinguisher lines and fasteners that could cause trouble. Starting May 2, 2025, inspections and fixes must be done to keep flights safe and sound. This might cost some time and money but keeps everyone flying worry-free!
Next: 2025-05296, Airworthiness Directives; The Boeing Company Airplanes
The FAA is making sure certain Boeing 777 airplanes get a software update to fix a problem that could cause pilots to get confusing landing info and descend too fast. This fix involves installing new autopilot software and checking its setup, keeping flights safer. Airlines must complete this by May 2, 2025, to avoid risks, with costs mainly tied to the software update and checks.