2025-05297RuleWallet

FAA Fixes Planes with Wrong-Material Parts Before They Fly Away

Published Date: 3/28/2025

Rule

Summary

The FAA is making new rules for certain ATR42-500 and ATR72-212A airplanes because some parts might have been made with the wrong materials. Airlines must inspect, fix, and eventually replace these parts to keep flights safe. These changes start May 2, 2025, and could cost some money but will keep passengers and crews secure.

Analyzed Economic Effects

2 provisions identified: 1 benefits, 1 costs, 0 mixed.

Mandatory inspections and part replacements

You must inspect, repair, and eventually replace certain vertical‑to‑horizontal stabilizer junction fittings on ATR42-500 and ATR72-212A airplanes as required by this AD and EASA AD 2024-0171. The rule is effective May 2, 2025, and applies to the airplanes identified in EASA AD 2024-0171.

Costs for aircraft operators to comply

The FAA estimates this AD affects 36 U.S.‑registered airplanes. Initial required actions are estimated at up to 26 work‑hours at $85/hour = up to $2,210 per airplane (up to $79,560 for U.S. operators). The FAA also lists on‑condition actions with up to 523 work‑hours at $85/hour and parts cost $50,795, with a labor/amount figure shown as $44,455 for on‑condition work per product.

Personalized for You

How does this regulation affect your finances?

Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.

Key Dates

Published Date
Rule Effective
3/28/2025
5/2/2025

Department and Agencies

Department
Independent Agency
Agency
Transportation Department
Federal Aviation Administration
Source: View HTML

Related Federal Register Documents

Previous / Next Documents

Back to Federal Register