Alaska Airway V-510 Amended After Radio Beacon Decommissioning
Published Date: 3/31/2025
Rule
Summary
The FAA is updating Alaska’s V-510 air route because the Anvik radio beacon is being shut down. Pilots flying in this area will see changes to their navigation paths, but no extra costs or delays are expected. This update keeps Alaska’s skies safe and smooth for everyone flying through.
No Economic Impacts Identified for this Document
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-10293 — Prohibition of Remote Dispatching
The FAA wants to stop airplane dispatchers from working remotely, except in emergencies when the main center is down. This change affects all domestic, flag, and supplemental airline operators and aims to keep flight safety tight and clear. Comments on this rule are open until July 21, 2026, so airlines and dispatchers should get ready for a new way of working that could shake up their routines.
2026-10270 — Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is requiring certain Embraer ERJ 190-100 ECJ airplanes to get a close check on their overheat detection sensors because some parts might not work right. If problems are found, those parts must be replaced, and no faulty parts can be installed anymore. This rule kicks in on June 26, 2026, helping keep flights safe without breaking the bank.
2026-10256 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus EC130T2 helicopters, the FAA wants you to install a new fix on the tail rotor drive shaft and keep checking its vibration regularly. This update replaces old rules and stops certain parts from being used unless they meet new safety standards. You’ve got until July 6, 2026, to share your thoughts, and while this might cost some bucks, it’s all about keeping flights safe and smooth.
2026-10271 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is making sure certain Bombardier BD-700 airplanes are safe by checking and fixing bolts on the baggage door that might have been tightened wrong. Owners need to inspect and adjust or replace these bolts by June 26, 2026, to keep flying safely. This fix helps avoid any door problems and keeps passengers secure without breaking the bank.
2026-10272 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330 planes, listen up! The FAA found a problem where a backup fuel pump might fail quietly, trapping fuel that can’t be used. Starting June 8, 2026, airlines must regularly check these pumps and fix any issues to keep flights safe—no big wallet hits expected, just smart safety moves.
Previous / Next Documents
Previous: 2025-05286 — Amendment of Jet Routes J-60 and J-82, and VOR Federal Airways V-8, V-55, and V-221; and Revocation of VOR Federal Airways V-92 and V-126 in the Vicinity of Goshen, IN
The FAA is updating some flight paths near Goshen, Indiana, by changing a few jet routes and VOR airways while removing two others. These changes happen because the Goshen navigation beacon is being turned off to modernize the system. Pilots flying in this area should note the new routes starting soon, with no extra costs involved.
Next: 2025-05339 — Partial Administrative Stay of National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review
The EPA is hitting pause on some new pollution rules for iron and steel factories, giving them 90 extra days before they have to follow certain 2025 deadlines. This gives the EPA time to rethink parts of the rules and helps the factories avoid rushing to meet new requirements. If you work in or with these steel plants, expect a short delay but no immediate cost changes yet.