FAA to Boeing: Check Your Titanium or Else!
Published Date: 5/14/2025
Proposed Rule
Summary
The FAA wants Boeing 787-9 and 787-10 planes checked because some parts might be made from the wrong metal. They’re asking for inspections to make sure the fittings are safe and to fix any problems found. This keeps flights safe and could mean some maintenance costs soon for airlines.
Analyzed Economic Effects
1 provisions identified: 0 benefits, 1 costs, 0 mixed.
Inspections for Boeing 787‑9/787‑10 Fittings
If you operate a Boeing Model 787‑9 or 787‑10 airplane, the FAA proposes required inspections of the attach fittings and upper splice fitting of the stub beam horizontal pressure deck to determine the titanium alloy material. If the fittings are wrong or unsafe, you must perform the applicable on‑condition actions, which could mean maintenance or repairs for the airplane operator.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-10293 — Prohibition of Remote Dispatching
The FAA wants to stop airplane dispatchers from working remotely, except in emergencies when the main center is down. This change affects all domestic, flag, and supplemental airline operators and aims to keep flight safety tight and clear. Comments on this rule are open until July 21, 2026, so airlines and dispatchers should get ready for a new way of working that could shake up their routines.
2026-10270 — Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is requiring certain Embraer ERJ 190-100 ECJ airplanes to get a close check on their overheat detection sensors because some parts might not work right. If problems are found, those parts must be replaced, and no faulty parts can be installed anymore. This rule kicks in on June 26, 2026, helping keep flights safe without breaking the bank.
2026-10256 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus EC130T2 helicopters, the FAA wants you to install a new fix on the tail rotor drive shaft and keep checking its vibration regularly. This update replaces old rules and stops certain parts from being used unless they meet new safety standards. You’ve got until July 6, 2026, to share your thoughts, and while this might cost some bucks, it’s all about keeping flights safe and smooth.
2026-10271 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is making sure certain Bombardier BD-700 airplanes are safe by checking and fixing bolts on the baggage door that might have been tightened wrong. Owners need to inspect and adjust or replace these bolts by June 26, 2026, to keep flying safely. This fix helps avoid any door problems and keeps passengers secure without breaking the bank.
2026-10272 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330 planes, listen up! The FAA found a problem where a backup fuel pump might fail quietly, trapping fuel that can’t be used. Starting June 8, 2026, airlines must regularly check these pumps and fix any issues to keep flights safe—no big wallet hits expected, just smart safety moves.
Previous / Next Documents
Previous: 2025-08496 — Agency Advisory Circular: Reduced Reliability Flight Safety System Design, Test, and Documentation
The FAA is rolling out new guidance to help companies design, test, and document safer flight systems for space launches and reentries, especially those with reduced reliability. If you’re applying for a launch or reentry license, this guide shows one way to meet the rules, but you can choose your own path too. This update helps speed up approvals and keeps space travel safer without extra costs or delays.
Next: 2025-08502 — Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes
If you own or work with Gulfstream G150 airplanes, listen up! The FAA wants you to update your maintenance plans to include a new safety rule from Israel’s aviation authority. This change helps keep these planes safe and sound, and you’ll need to act soon to stay in the clear.