Boeing Floors Flub: FAA Demands Quick Material Swap for Safety
Published Date: 5/28/2025
Rule
Summary
The FAA is making Boeing 787-9 and 787-10 airplanes safer by fixing some floor parts made with the wrong material. Owners must replace these parts, check for damage, and fix any problems found. This update helps keep flights safe and might cost some time and money to complete soon.
Analyzed Economic Effects
1 provisions identified: 0 benefits, 1 costs, 0 mixed.
Boeing 787-9/10 floor fittings replacement
If you own or operate Boeing Model 787-9 or 787-10 airplanes, you must replace floor beam side-of-body fittings that were made from the wrong material. You must also inspect the fuselage frame and fastener holes for damage and repair any damage found. The FAA issued this rule to address the unsafe condition and it may cost owners time and money to complete.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-10293 — Prohibition of Remote Dispatching
The FAA wants to stop airplane dispatchers from working remotely, except in emergencies when the main center is down. This change affects all domestic, flag, and supplemental airline operators and aims to keep flight safety tight and clear. Comments on this rule are open until July 21, 2026, so airlines and dispatchers should get ready for a new way of working that could shake up their routines.
2026-10270 — Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is requiring certain Embraer ERJ 190-100 ECJ airplanes to get a close check on their overheat detection sensors because some parts might not work right. If problems are found, those parts must be replaced, and no faulty parts can be installed anymore. This rule kicks in on June 26, 2026, helping keep flights safe without breaking the bank.
2026-10256 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus EC130T2 helicopters, the FAA wants you to install a new fix on the tail rotor drive shaft and keep checking its vibration regularly. This update replaces old rules and stops certain parts from being used unless they meet new safety standards. You’ve got until July 6, 2026, to share your thoughts, and while this might cost some bucks, it’s all about keeping flights safe and smooth.
2026-10271 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is making sure certain Bombardier BD-700 airplanes are safe by checking and fixing bolts on the baggage door that might have been tightened wrong. Owners need to inspect and adjust or replace these bolts by June 26, 2026, to keep flying safely. This fix helps avoid any door problems and keeps passengers secure without breaking the bank.
2026-10272 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330 planes, listen up! The FAA found a problem where a backup fuel pump might fail quietly, trapping fuel that can’t be used. Starting June 8, 2026, airlines must regularly check these pumps and fix any issues to keep flights safe—no big wallet hits expected, just smart safety moves.
Previous / Next Documents
Previous: 2025-09505 — Airworthiness Directives; Airbus SAS Airplanes
The FAA is making new rules for certain Airbus A321 planes because some parts on emergency exit doors moved out of place. Airlines must regularly check these parts and fix or replace them if needed to keep everyone safe. These inspections and fixes need to happen on a set schedule, so airlines should be ready to act quickly and spend some money to stay compliant.
Next: 2025-09507 — Airworthiness Directives; Bombardier, Inc., Airplanes
If you fly certain Bombardier planes, this new rule means you need to double-check and possibly fix the portable oxygen bottle setup to keep it safe. The FAA found that a part can get caught and cause trouble, so they’re expanding who needs to act. You’ll want to get this done soon to avoid any safety risks or delays.