Boeing 787 Floor-Inspection Rule Gets a Small Typographical Rescue
Published Date: 6/6/2025
Rule
Summary
If you own or operate Boeing 787-9 or 787-10 airplanes, listen up! The FAA fixed a small mistake in a safety rule about inspecting and fixing certain floor parts on these planes. This correction kicks in on July 2, 2025, and keeps the original safety steps and deadlines intact—no extra costs or delays, just clearer instructions.
Analyzed Economic Effects
2 provisions identified: 1 benefits, 1 costs, 0 mixed.
Mandatory floor-beam fixes for 787-9/787-10
If you own or operate Boeing 787-9 or 787-10 airplanes, you must address floor beam side-of-body fittings between station 1233 and station 1593. The rule requires either inspecting those fittings using an X‑ray fluorescence spectrometer or a high frequency eddy current inspection, or replacing all fittings with the correct material, and then inspecting the fuselage frame and fastener holes for damage, repairing any damage, and installing fittings made of the correct material per Boeing Alert Requirements Bulletin B787-81205-SB530084-00 RB, Issue 002, dated September 5, 2024. These actions must be done at the times specified in the bulletin and the AD is effective July 2, 2025.
Administrative correction leaves no extra burden
The FAA corrected an incorrect reference in the AD so that repair approvals refer to the Alternative Methods of Compliance (AMOCs) paragraph (j) instead of paragraph (i). The correction is effective July 2, 2025, and the FAA states this correction imposes no adverse economic impact and adds no additional burden on any person; the AD’s original safety steps and deadlines remain unchanged.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-10315, Amendment of Class E Airspace; Tarboro, NC
The FAA fixed a mistake in the coordinates for Tarboro-Edgecombe Airport in North Carolina’s Class E airspace rules. This correction ensures the airspace matches the right location for safer helicopter GPS approaches at ECU Health Edgecombe Heliport. The updated rule kicks in on June 12, 2025, with no extra costs or delays for pilots or the community.
Next: 2025-10317, Electronic Submission of Mariner Course Completion Data; Corrections
The Coast Guard fixed some accidental mistakes made in a 2024 rule about mariner training records. They put back important paragraphs that were accidentally deleted and restored some wording to how it was before. These fixes don’t change any rules or costs but make sure everything is clear and correct starting June 6, 2025, for mariners and training providers.