2025-11050Proposed RuleWallet

Boeing 787s Face Faucet Upgrades to Fix Lavatory Sink Leaks

Published Date: 6/16/2025

Proposed Rule

Summary

If you own or operate Boeing 787 airplanes, the FAA wants you to keep checking under the lavatory sinks for leaks like before, but now you’ll also need to replace the faucet control modules with a better design. This upgrade stops the need for constant inspections and adds leak tests and moisture devices to keep things safe. Comments on this plan are open until July 31, 2025, so get ready to act soon and keep those planes leak-free!

Analyzed Economic Effects

5 provisions identified: 0 benefits, 5 costs, 0 mixed.

Mandatory faucet control module replace

If you own or operate affected Boeing 787-8, 787-9, or 787-10 airplanes (specific line numbers listed in the AD), you must replace faucet control module (FCM) part number AFUT000200A0001 or AFUT000200A0002 with the improved FCM P/N AFUT000200A0004. Replacing the FCM is the terminating action for the repetitive general visual inspections (GVIs) required by AD 2024-01-01.

Install moisture management devices

The proposed AD requires installing moisture management devices where not previously installed. The FAA estimates installation labor at 79 work-hours (79 x $85 = $6,715) plus parts cost $1,610, for an estimated cost per airplane of $8,325; the FAA estimates this applies to 52 U.S.-registered airplanes (total estimated cost $432,900).

Update maintenance program documentation

The AD requires reviewing and, if necessary, updating maintenance program documentation to include Maintenance Review Board Report item number 38-025-00. The FAA estimates this revision takes an average of 90 work-hours per operator, at $85 per hour, for an estimated average cost of $7,650 per operator.

Cost for on-condition FCM replacements

If an inspection or leak test finds a leak, the AD requires on-condition replacement of the affected FCM. The FAA estimates on-condition replacement cost per event at roughly $6,100 (parts approximately $6,021 plus labor), in addition to any leak-test and corrective-action labor.

Keep doing lavatory leak inspections

Until you replace the FCM, the AD keeps requiring repetitive general visual inspections (GVIs) under all lavatory washbasins for leaks at the FCM as required by AD 2024-01-01. The FAA estimates the GVI labor cost is 2 work-hours (2 x $85 = $170) per inspection cycle, and the AD would affect 155 U.S.-registered airplanes.

Personalized for You

How does this regulation affect your finances?

Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.

Key Dates

Published Date
6/16/2025

Department and Agencies

Department
Independent Agency
Agency
Transportation Department
Federal Aviation Administration
Source: View HTML

Related Federal Register Documents

Previous / Next Documents

Back to Federal Register