FAA Says Airbus Rudder Fittings Need Properly Tightened Bolts
Published Date: 6/20/2025
Rule
Summary
The FAA is making sure certain Airbus Canada BD-500-1A11 airplanes get their rudder hydraulic fittings tightened just right using a properly calibrated torque wrench. This fix stops leaks that could cause safety problems. Starting July 25, 2025, operators must follow these new rules, which might cost some time and money but keep flights safe and sound.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Mandatory rudder PCU torque and seal work
If you operate Airbus Canada Model BD-500-1A11 airplanes, you must properly torque the rudder hydraulic power control unit (PCU) union fittings and apply a torque seal as required by Transport Canada AD CF-2024-13. The AD applies to these airplanes beginning July 25, 2025 and requires cleaning leaks at coil B-nut connections, performing a visual inspection of all Rudder PCU coil tube fittings (upper, middle, lower), and doing the corrective actions specified in the incorporated Transport Canada material.
Potential replacement of components or rudder PCU
The corrective actions in the incorporated Transport Canada AD include replacing any defective components and replacing the rudder PCU when required. These replacements may be performed as part of compliance with the inspection and corrective-action steps.
FAA cost estimate: small U.S. fleet affected
The FAA estimates the AD affects 5 U.S.-registered BD-500-1A11 airplanes. Labor is estimated at up to 9 work-hours per airplane at $85 per hour (up to $765 per airplane) for an aggregate U.S. cost of up to $3,825; the FAA did not provide a definitive parts cost estimate.
Permitted leak tolerance per AMP task
The FAA revised the AD to allow that some hydraulic leaks may be permissible if the leak rate is within the allowable leakage limits of the airplane maintenance program (AMP) task (AMP BD500-A-J27-21-01-01AAA-364B-A). All applicable corrective actions must be done before further flight except as specified in steps 13 and 22 of that AMP task.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-11373, Air Plan Approval; New York; Fuel Composition and Use
The EPA is giving a thumbs-up to New York’s updated rules that cut down on sulfur and tiny pollution particles from fuels, including waste oil. These changes help keep the air cleaner and safer for everyone in New York, starting July 21, 2025. Businesses using waste oil will follow new rules for burning, tracking, and reporting, making sure pollution stays low without extra costs.
Next: 2025-11386, Type of Regulation; Wisconsin River, Wausau, WI
The Coast Guard is setting up a temporary safety zone on the Wisconsin River in Wausau during the Wings Over Wausau Air Show on June 27-28, 2025, from 5:30 to 7:30 p.m. This means boats and people can’t enter the area unless they get special permission. The rule helps keep everyone safe and the environment protected during the event, with no extra costs for the public.