Ultrasound Could Let Gas Cylinders Wait Ten Years Between Tests
Published Date: 7/1/2025
Proposed Rule
Summary
The Department of Transportation wants to make it official that certain gas cylinders can be tested every 10 years instead of more often, thanks to better ultrasonic testing technology. This change helps companies save time and money by reducing how often they need to check cylinders used for flammable and non-flammable gases. If you’re involved with these cylinders, speak up by September 2, 2025, before the new rule kicks in!
Analyzed Economic Effects
4 provisions identified: 4 benefits, 0 costs, 0 mixed.
10‑Year Requalification Allowed via Ultrasonic Testing
If you own or operate DOT specification 3A or 3AA gas cylinders with a water capacity of 56.7 kg (125 lb.) or less, the rule would allow requalification every 10 years instead of every 5 years when using ultrasonic examination (UE). The cylinders must have been manufactured after December 31, 1945; be used only for the listed gases (including air, argon, helium, oxygen, nitrogen, neon, hydrogen, deuterium, certain mixtures) with all mixtures having a dew point at or below −52°F at 1 atmosphere; must not have carbon dioxide added or contain toxic/corrosive gases; cannot be used for underwater breathing; and each must be stamped with a five‑pointed star at least 1/4 inch high after the test date.
Faster Testing, Less Downtime, Fewer Permits
Using UE testing means cylinders do not have to be drained or have valves removed before testing, so testing is faster, cylinders can return to service immediately, and risk of contamination is reduced. PHMSA also proposes to adopt the special permit into the regulations so permit holders would no longer need to renew that special permit periodically.
PHMSA Finds UE Is At Least As Safe
PHMSA reviewed the use of the special permit and found no compliance violations or incidents associated with UE; the agency determined UE is likely a superior examination method and expects an equivalent or improved level of safety compared to existing requirements.
Federal Rule May Preempt State Testing Rules
The proposed amendment addresses the federal subject covering the design, manufacture, inspection, marking, maintenance, reconditioning, repair, or testing of packagings and would preempt State, local, and Tribal requirements that are not "substantively the same" as the federal requirements for these matters.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-22396, Pipeline Safety: Amendments to Liquefied Natural Gas Facilities
The government wants to update safety rules for liquefied natural gas (LNG) facilities to match the latest industry standards and new technology. These changes affect LNG operators and aim to make facilities safer by using smarter, risk-based approaches. Comments on the proposal are open until January 4, 2027, with no immediate cost changes announced.
2026-13805, Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines
The government wants to update pipeline safety rules to make fixing gas and liquid pipelines smarter, safer, and cheaper. These changes affect pipeline operators who’ll use new tech and clearer guidelines to spot and repair problems faster. Comments are open until September 8, 2026, so get ready to weigh in before the rules get final—and yes, this could save money and prevent accidents!
2026-10969, Pipeline Safety: Breakout Tank Inspection Rule
The Pipeline Safety folks want to update rules for breakout tanks—those tanks that help manage and store hazardous liquids in pipelines. They’re switching to a newer, smarter inspection method that checks tanks based on risk, not just a set schedule. This affects pipeline operators, who should get ready to follow these updated inspections and can share their thoughts by August 3, 2026.
2026-10782, Pipeline Safety: Class Location Change Requirements; Correction
PHMSA fixed a small but important detail in a new pipeline safety rule from January 2026. Pipeline operators can now confirm or restore safe pressure levels when neighborhoods change around their pipes, with a clear 24-month deadline starting either from the rule’s effective date or when they begin work. This helps keep gas pipelines safe without confusion about timing, so operators know exactly when to act and avoid costly delays.
2026-08144, Administrative Rulemaking, Guidance, and Enforcement Procedures
The Department of Transportation is bringing back and improving its rules for making new policies, giving guidance, and enforcing laws. This affects anyone involved in transportation regulations, making the process clearer and more consistent. These changes kick in on May 27, 2026, aiming to save time and avoid confusion without adding extra costs.
2026-08058, Pipeline Safety: Safety of Gas Transmission Pipelines: MAOP Reconfirmation, Expansion of Assessment Requirements, and Other Related Amendments; Correction
This update fixes a numbering mistake in the rules for checking the maximum safe pressure of gas pipelines. Pipeline operators must follow the corrected list to avoid confusion, but no new costs or deadlines are added. The fix takes effect on August 3, 2026, making safety rules clearer and easier to follow.
Previous / Next Documents
Previous: 2025-12082, Hazardous Materials: Allowing Fireworks Certification Agencies (FCAs) To Approve Professional Fireworks
PHMSA wants to make it easier and faster for professional fireworks to get approved by letting Fireworks Certification Agencies (FCAs) approve more types of fireworks built to new safety standards. This change helps fireworks makers by giving them more flexibility and speeds up the approval process. If you’re in the fireworks business, get ready to share your thoughts by September 2, 2025!
Next: 2025-12084, Hazardous Materials: Improving Efficiencies for Special Permits and Approvals Renewals
If you hold a special permit or approval for handling hazardous materials, good news! You’ll soon be able to renew your permit anytime before it expires instead of rushing to apply 60 days early. This change saves time and hassle, helping businesses keep things moving smoothly without extra stress. Comments on this proposal are open until September 2, 2025.