Honda Jet Owners May Need New, Slimmer Aileron Balance Weights
Published Date: 7/7/2025
Proposed Rule
Summary
If you own a Honda HA-420 airplane, the FAA wants you to swap out some wing parts because a tiny gap is too small and could be unsafe. They’re proposing to replace the current aileron balance weights with new, slimmer ones to keep your flight smooth and safe. You’ve got until August 21, 2025, to share your thoughts, and this fix might cost some time and money but keeps you flying worry-free!
Analyzed Economic Effects
4 provisions identified: 1 benefits, 2 costs, 1 mixed.
Mandatory aileron-weight replacement and cost
If you own or operate a Honda Model HA-420 with the specified aileron balance weight part numbers, you must replace the left and right inboard and outboard fixed aileron balance weights. The FAA estimates labor as 45 work-hours at $85/hour ($3,825), parts $3,676, for a total cost of $7,501 per airplane and $285,038 for 38 U.S.-registered airplanes.
Who must comply and timing
This AD applies to Honda HA-420 serial numbers 42000172, 42000235–42000265, and 42000267–42000272 with aileron balance weight part number HJ1-15751-152-003 or HJ1-15751-157-003 installed. You must comply before further flight after the AD's effective date, and the FAA must receive comments on the proposed AD by August 21, 2025.
Uncertain additional repair costs; warranty may help
The FAA says repair instructions could vary if proper aileron balance cannot be attained with adjustable weights and it cannot estimate costs for those repairs. The manufacturer says some costs may be covered under warranty, which could reduce out-of-pocket expense for operators.
Parts handling: remove from service; no return required
When replacing the balance weights, you must remove the replaced parts from service instead of discarding them, and you are not required to return those parts to the manufacturer.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-12534, Employment of Workers With Disabilities Under Section 14(c) of the Fair Labor Standards Act; Withdrawal
The Department of Labor has decided to stop the plan to phase out special certificates that let employers pay workers with disabilities less than minimum wage. This means the current rules under Section 14(c) of the Fair Labor Standards Act will stay as they are for now. Workers with disabilities and their employers won’t see any changes or new costs starting July 7, 2025.
Next: 2025-12563, Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA wants to fix a safety glitch in certain ATR42-500 and ATR72 airplanes where the travel limitation unit (TLU) might get confused at high speeds. They’re proposing to add some relays and wiring, plus run tests to keep flights safe. If you own or operate these planes, you should check out the plan and send your thoughts by August 21, 2025.