Federal Agencies Pull Back Plan for Truck Speed Limiters
Published Date: 7/24/2025
Proposed Rule
Summary
The government has decided to cancel plans that would have required big trucks (over 26,000 pounds) to have speed limiters to control how fast they can go. This change affects truck companies and drivers who were expecting new rules and costs related to installing and maintaining these devices. The withdrawal takes effect on July 24, 2025, meaning no new speed limiter rules will be enforced for now.
Analyzed Economic Effects
4 provisions identified: 4 benefits, 0 costs, 0 mixed.
Mandatory truck speed limiter rule withdrawn
The Agencies withdrew the proposed rule that would have required heavy vehicles (GVWR over 11,793 kg / 26,000 pounds) to be equipped with and maintained at a set speed. The withdrawal (effective July 24, 2025) cancels the potential compliance costs the NPRM previously estimated could range from about $209 million to $1.561 billion per year.
Avoids potential reduced driver earnings
Commenters and the Agencies noted that limiting truck speeds could reduce the number of miles drivers can travel and thereby reduce driver pay (because pay historically is tied to miles). With the withdrawal effective July 24, 2025, the Agencies are not imposing the speed limits that commenters said could lower driver incomes.
State speed-limit authority preserved
The Agencies concluded the proposed federal speed limiter rule could have, over time, displaced States' authority to set speed limits for heavy vehicles (the proposed limits analyzed were 60, 65, and 68 mph). By withdrawing the proposals as of July 24, 2025, the Agencies preserve State authority to set speed limits on their roadways.
Voluntary use and availability of speed limiters unaffected
The Agencies state that all recently manufactured heavy vehicles come with electronic engine control units (ECUs) and that the withdrawal does not affect the availability of speed limiting devices or operators' ability to voluntarily set and maintain speed limits on their vehicles.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08144, Administrative Rulemaking, Guidance, and Enforcement Procedures
The Department of Transportation is bringing back and improving its rules for making new policies, giving guidance, and enforcing laws. This affects anyone involved in transportation regulations, making the process clearer and more consistent. These changes kick in on May 27, 2026, aiming to save time and avoid confusion without adding extra costs.
2026-23239, Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
The government is updating car light and reflector rules to fit self-driving vehicles better. This change affects car makers and tech companies working on automated driving systems. They’ve extended the time to share thoughts on these new rules until December 10, 2026, giving everyone a bit more time to weigh in before any costs or changes kick in.
2026-21794, Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
NHTSA is updating vehicle lighting rules to better fit cars with self-driving tech and remove outdated requirements. These changes mainly affect vehicles with Automated Driving Systems (ADS) that don’t have manual controls, making designs simpler and cutting unnecessary costs without hurting safety. Comments are open until November 25, 2026, so manufacturers and the public can weigh in before these smarter, more flexible rules roll out.
2026-19964, The Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule III for Model Years 2022 to 2031 Passenger Cars and Light Trucks
The SAFE Vehicles Rule III updates fuel economy standards for cars and light trucks from 2022 to 2031, making sure manufacturers build vehicles that better match what American families want and need. This rule changes how fuel efficiency is measured and sets new deadlines starting November 30, 2026. It aims to save money at the pump and help the environment by encouraging smarter, more affordable vehicle designs.
2026-11072, Federal Motor Vehicle Safety Standard No. 214; Side Impact Protection; Federal Motor Vehicle Safety Standard No. 305a; Electric-Powered Vehicles: Electric Powertrain Integrity; Federal Motor Vehicle Safety Standard No. 307; Fuel System Integrity of Hydrogen Vehicles
Starting July 6, 2026, car makers must follow updated safety rules that clean up old, outdated side-impact protection standards and fix related rules for electric and hydrogen vehicles. These changes make the rules clearer without adding new costs or big changes for manufacturers. If anyone wants to challenge the updates, they have until July 20, 2026, to speak up.
2026-05024, Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 102 To Accommodate ADS-Equipped Vehicles
NHTSA wants to update a safety rule to help self-driving cars that don’t have steering wheels or gear shifts. They’re proposing to remove the need for a gear position display in these automated vehicles, cutting costs without hurting safety. If you have thoughts, speak up by April 15, 2026!
Previous / Next Documents
Previous: 2025-13920, Airworthiness Directives; The Boeing Company Airplanes
The FAA wants to update safety rules for certain Boeing 737-700 planes to catch cracks in the fuselage skin sooner and keep them safe. This means inspections will happen more often and after certain fixes, too. Airlines need to comment by September 8, 2025, and be ready for these quicker checks, which could cost some time and money but keep flights safer.
Next: 2025-13930, Air Plan Approval; Texas; Reasonably Available Control Technology in the Dallas-Fort Worth Ozone Nonattainment Area
The EPA is proposing to approve Texas’s plan to reduce air pollution in the Dallas-Fort Worth area by updating rules that control harmful nitrogen oxide emissions from big sources. This helps the region meet clean air standards and protect public health. People and businesses in DFW should know the comment period ends August 25, 2025, so now’s the time to weigh in!