More Woven Blade Safety Specs for CFM's LEAP-1B Engine Model
Published Date: 8/4/2025
Rule
Summary
CFM International’s LEAP-1B engines now use cool woven composite fan blades, which are new and different. Since current safety rules don’t fully cover this design, the FAA updated special safety standards to keep everyone safe. This change affects engine makers and airlines, ensuring these blades meet top safety levels without extra costs or delays.
Analyzed Economic Effects
1 provisions identified: 1 benefits, 0 costs, 0 mixed.
New Safety Rules for Woven Fan Blades
The FAA amended Special Condition No. 33-017-SC for CFM International’s LEAP-1B engines because they now incorporate woven composite fan blades. The amendment adds special safety standards so these new blades meet a level of safety equivalent to existing airworthiness rules, and it applies to engine makers and airlines.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-10293 — Prohibition of Remote Dispatching
The FAA wants to stop airplane dispatchers from working remotely, except in emergencies when the main center is down. This change affects all domestic, flag, and supplemental airline operators and aims to keep flight safety tight and clear. Comments on this rule are open until July 21, 2026, so airlines and dispatchers should get ready for a new way of working that could shake up their routines.
2026-10270 — Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is requiring certain Embraer ERJ 190-100 ECJ airplanes to get a close check on their overheat detection sensors because some parts might not work right. If problems are found, those parts must be replaced, and no faulty parts can be installed anymore. This rule kicks in on June 26, 2026, helping keep flights safe without breaking the bank.
2026-10256 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus EC130T2 helicopters, the FAA wants you to install a new fix on the tail rotor drive shaft and keep checking its vibration regularly. This update replaces old rules and stops certain parts from being used unless they meet new safety standards. You’ve got until July 6, 2026, to share your thoughts, and while this might cost some bucks, it’s all about keeping flights safe and smooth.
2026-10271 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is making sure certain Bombardier BD-700 airplanes are safe by checking and fixing bolts on the baggage door that might have been tightened wrong. Owners need to inspect and adjust or replace these bolts by June 26, 2026, to keep flying safely. This fix helps avoid any door problems and keeps passengers secure without breaking the bank.
2026-10272 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330 planes, listen up! The FAA found a problem where a backup fuel pump might fail quietly, trapping fuel that can’t be used. Starting June 8, 2026, airlines must regularly check these pumps and fix any issues to keep flights safe—no big wallet hits expected, just smart safety moves.
Previous / Next Documents
Previous: 2025-14711 — Special Conditions: CFM International, LEAP-1A and -1C Engine Models; Incorporation of Woven Composite Fan Blades
CFM International’s LEAP-1A and LEAP-1C engines are getting a cool upgrade with woven composite fan blades, which are new and different. Since current safety rules don’t fully cover this design, special safety standards are being added to keep everyone safe. This change affects engine makers and users, ensuring top safety without extra costs or delays.
Next: 2025-14725 — Competitive Bidding Rules for Auction of AWS-3 Licenses
The FCC is updating the rules for who can get special discounts when bidding on AWS-3 wireless licenses. These changes mainly affect small businesses trying to win spots in the 1695-1710 MHz, 1755-1780 MHz, and 2155-2180 MHz bands. If you’re a small business looking to join the auction, get ready for new eligibility rules that could save you money and change how you qualify.