FAA Orders Airbus to Tame Lavatory Wiring Before It Bites
Published Date: 9/29/2025
Proposed Rule
Summary
The FAA wants to fix a wiring problem in certain Airbus Canada airplanes that could cause safety issues. They’re asking owners to check and fix the lavatory’s electrical harness to prevent damage near oxygen lines. This needs to happen soon to keep flights safe, but it’s a smart move to avoid bigger problems later.
Analyzed Economic Effects
2 provisions identified: 1 benefits, 1 costs, 0 mixed.
Operators must inspect and repair lavatory wiring
If you own or operate Airbus Canada Model BD-500-1A10 or BD-500-1A11 airplanes, the FAA proposes you must inspect the lavatory A electrical sleeve and harness for chafing damage and incorrect installation and perform required repairs (on-condition actions). This is aimed at fixing reduced bend radii, unsecured harnesses, and lack of required clearance from an oxygen supply line.
Improves passenger safety on specific Airbus models
The proposed AD aims to prevent damage to lavatory wiring that could contact an oxygen supply line on Airbus Canada Model BD-500-1A10 and BD-500-1A11 airplanes. You as a passenger would benefit because the inspections and fixes are intended to reduce a safety hazard related to wiring chafing near oxygen lines.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16913, Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Maintenance, Preventive Maintenance, Rebuilding, and Alteration; Correction
In accordance with the Paperwork Reduction Act of 1995, FAA invites public to make comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 02, 2026. The Information to be collected is necessary to insure the safety of the flying public. Documentation of maintenance repair actions record who, what, when, where and how of the task performed. All maintenance actions as well as documentation are required by Title 14 CFR part 43. This collection focuses on Form 337 which is collected by the FAA. Other records for preventative maintenance, and logbook entries are not collected by the FAA serve as a responsibility of the owner to maintain in case of verification of airworthiness when seeking approval or sale of the aircraft. This ensures proper certification of personnel; proper tooling is utilized and accurate measures to ensure safety. Total form 337s submitted in 2024 is 76,253. Total general aviation aircraft registrations on file are 438,651. It is estimated by the numbers collected one in every five aircraft have a 337-form submitted for major alteration and repairs performed. Each 337 takes approximately 1 hour.
2026-16874, Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A330-941 airplanes. This proposed AD was prompted by an occurrence of a triple "PRIM FAULT" in the Flight Control Primary Computer (FCPC) at touchdown. This proposed AD would require the installation of a new FCPC standard and applicable concurrent modifications. This proposed AD would also prohibit the installation of certain parts The FAA is proposing this AD to address the unsafe condition on these products.
2026-16888, Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Previous / Next Documents
Previous: 2025-18807, Tribal Consultation for SBA's Office of Manufacturing and Trade and Other Small Business Programs and Services Offered by the Agency, With a Focus on SBA's Ongoing Manufacturing, Onshoring and Export Initiatives To Encourage Small Businesses Going Global
The SBA is inviting tribal businesses to share their thoughts on how to make manufacturing, onshoring, and export programs work better for them. This is a chance for tribes to help shape small business support that helps them grow and sell products worldwide. The meeting in Mashantucket, Connecticut, is all about making these programs easier and more helpful, with no specific money changes yet but plenty of opportunities to influence future moves.
Next: 2025-18810, Withdrawal of Proposed Regulatory Actions
The U.S. Consumer Product Safety Commission is officially stopping some rule proposals they made from 2009 to 2024. This means no new rules will come from those ideas for now, so businesses and consumers can relax a bit. If they change their minds later, they’ll start fresh with new proposals.