FAA Orders Rivet Checks on Textron Planes to Prevent Failures
Published Date: 10/2/2025
Rule
Summary
If you own a Textron B200GT, B200CGT, B300, or B300C airplane, listen up! The FAA found a problem with the rudder control pushrod rivets that could cause failure, so they’re requiring a quick visual check and fixing any bad rivets. This keeps your plane safe and flying smoothly without breaking the bank or causing long delays.
Analyzed Economic Effects
1 provisions identified: 1 benefits, 0 costs, 0 mixed.
Required Rivet Inspection and Repair
If you own a Textron Model B200GT, B200CGT, B300, or B300C airplane, the FAA requires a visual inspection of the attaching rivets on the pilot and copilot rudder control pushrods for incorrect rivets. Any incorrect or sheared rivets must be replaced to address a reported rudder control pushrod failure risk.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-11875 — Petition for Exemption; Summary of Petition Received; NetJets Aviation, Inc.
NetJets Aviation, a big private jet company, asked the FAA to let them skip some usual flight rules. This could change how they operate their planes, and the public has until July 2, 2026, to share their thoughts. No money changes are mentioned yet, but this could speed up or simplify some flights for NetJets.
2026-11861 — Establishment of Class E Airspace; Freer, TX
The FAA is creating new Class E airspace around Silverhorn Ranch Airport in Freer, TX, to support safer flying with new instrument flight rules. This change starts on October 29, 2026, and mainly affects pilots flying in and out of this airport. No extra costs for the public, just smoother and safer skies for everyone!
2026-11904 — Establishment of Class E Airspace; Mullin, TX
The FAA is creating new Class E airspace around Smoky Bend Ranch Airport in Mullin, TX to help pilots fly safely using instruments, especially in bad weather. This change starts on October 29, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just smoother and safer skies for everyone!
2026-11792 — Modification of Class E Airspace, Omak Airport, Omak, WA
The FAA is changing the Class E airspace around Omak Airport in Washington to make flying safer and smoother for pilots using instruments. This update starts on September 3, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just better airspace management to keep flights on track!
2026-11730 — Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Starting June 11, 2026, the FAA is updating how pilots approach and take off from certain airports to keep flights safe and smooth. These changes affect pilots and airports by adjusting flight paths and safety rules based on new tech and obstacles. No big costs here—just smarter, safer skies for everyone flying under instrument rules!
Previous / Next Documents
Previous: 2025-19349 — Specific Listing for 1-boc-4-piperidone, a Currently Controlled List I Chemical
The DEA is officially adding 1-boc-4-piperidone to the list of controlled chemicals with its own special code. This change makes it clearer and easier to track, helping businesses and law enforcement stay on the same page. The update is effective immediately and won’t cost anyone extra but keeps things safer and more organized.
Next: 2025-19355 — Airworthiness Directives; Fiberglas-Technik Rudolf Lindner GmbH & Co. KG (Type Certificate Previously Held by GROB Aircraft AG, Grob Aerospace GmbH i.l., Grob Aerospace GmbH, Burkhart Grob Luft- und Raumfahrt GmbH & Co. KG) Gliders
If you own a Fiberglas-Technik Rudolf Lindner glider, listen up! The FAA found rust problems on a key rudder part, so they’re requiring regular checks, a one-time deep inspection, and some fixes to keep your glider safe and sound. If serious rust shows up, you’ll need to replace the rudder, and sealing the part stops the need for future checks. Get ready to act soon to keep flying worry-free!