FAA Demands Replacement of Dodgy Blades on Airbus Helicopters
Published Date: 11/18/2025
Proposed Rule
Summary
The FAA wants to make sure Airbus EC 130 T2 helicopters stay safe by replacing some main rotor blades that weren’t properly certified. If you own or operate these helicopters, you’ll need to swap out the affected blades and can’t put those old ones back on. Comments on this plan are open until January 2, 2026, so act fast if you have thoughts or questions!
Analyzed Economic Effects
2 provisions identified: 0 benefits, 2 costs, 0 mixed.
Mandatory MRB replacement for EC 130 T2
If you own or operate an Airbus EC 130 T2 helicopter delivered before September 23, 2024, you must replace any main rotor blades with part number 355A11003002 because they were not certified for installation. The FAA proposes to require replacing them with serviceable MRBs P/N 355A11003004 and prohibits installing the affected MRBs, in accordance with EASA AD 2025-0062.
FAA estimated compliance costs and scope
The FAA estimates this AD would affect 111 U.S.-registered EC 130 T2 helicopters. The agency lists parts cost per MRB as $106,496 and labor as 1 work-hour at $85, giving a cost per product of $106,581 and a total estimated cost to U.S. operators of $11,830,491; up to three MRBs may need replacement per helicopter.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-11875 — Petition for Exemption; Summary of Petition Received; NetJets Aviation, Inc.
NetJets Aviation, a big private jet company, asked the FAA to let them skip some usual flight rules. This could change how they operate their planes, and the public has until July 2, 2026, to share their thoughts. No money changes are mentioned yet, but this could speed up or simplify some flights for NetJets.
2026-11861 — Establishment of Class E Airspace; Freer, TX
The FAA is creating new Class E airspace around Silverhorn Ranch Airport in Freer, TX, to support safer flying with new instrument flight rules. This change starts on October 29, 2026, and mainly affects pilots flying in and out of this airport. No extra costs for the public, just smoother and safer skies for everyone!
2026-11904 — Establishment of Class E Airspace; Mullin, TX
The FAA is creating new Class E airspace around Smoky Bend Ranch Airport in Mullin, TX to help pilots fly safely using instruments, especially in bad weather. This change starts on October 29, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just smoother and safer skies for everyone!
2026-11792 — Modification of Class E Airspace, Omak Airport, Omak, WA
The FAA is changing the Class E airspace around Omak Airport in Washington to make flying safer and smoother for pilots using instruments. This update starts on September 3, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just better airspace management to keep flights on track!
2026-11730 — Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Starting June 11, 2026, the FAA is updating how pilots approach and take off from certain airports to keep flights safe and smooth. These changes affect pilots and airports by adjusting flight paths and safety rules based on new tech and obstacles. No big costs here—just smarter, safer skies for everyone flying under instrument rules!
Previous / Next Documents
Previous: 2025-20091 — Airworthiness Directives; Airbus Helicopters
The FAA wants all owners of certain Airbus AS-350 helicopters to check a specific cargo hook for safety gaps and replace it if needed. They also want to stop anyone from putting the faulty cargo hooks on helicopters in the future. Comments on this safety check must be sent by January 2, 2026, and fixing or replacing parts might cost some money but keeps flights safe and sound.
Next: 2025-20093 — Airworthiness Directives; MD Helicopters, LLC Helicopters
The FAA wants to update safety rules for certain MD Helicopters models by expanding inspections on torque tube parts to keep flights safe. If you own one of these helicopters, you’ll need to keep checking and possibly replace parts to avoid problems. Comments on this proposal are open until January 2, 2026, so there’s time to weigh in before changes kick in.