Boeing MD-11 Engine Falls Off: FAA Issues Broader Airworthiness Fixes
Published Date: 11/24/2025
Rule
Summary
The FAA is updating safety rules for Boeing airplanes after a scary accident where an engine fell off during takeoff. Now, more Boeing models like the MD-10 and DC-10 series must be inspected and fixed before flying again. These new rules start December 1, 2025, and could cost operators some time and money but keep everyone safer in the sky.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Grounding until inspection and fixes
As of December 1, 2025, affected Boeing MD-11, MD-11F, MD-10 (MD-10-10F, MD-10-30F) and DC-10 series airplanes are prohibited from further flight until each airplane is inspected and all applicable corrective actions are performed using a method approved by the Manager, AIR-520, Continued Operational Safety Branch, FAA. The rule continues the emergency requirement first sent to known U.S. owners and operators on November 14, 2025.
More Boeing models added; 167 U.S. planes affected
The AD expands applicability beyond MD-11/MD-11F to include MD-10-10F, MD-10-30F, and DC-10 models (DC-10-10, -10F, -15, -30, -30F (KC-10A and KDC-10), -40, -40F), and the FAA estimates the rule affects 167 airplanes of U.S. registry. The FAA also states it has no definitive data to estimate the inspection and corrective-action costs.
Special flight permits restricted
Special flight permits under 14 CFR 21.197 and 21.199 are not allowed for affected airplanes unless approved per the procedures specified in the AD (see paragraph (i)(1)). This means operators cannot move affected airplanes under a standard special flight permit without separate approved authorization.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16506, Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC 155 B and EC 155 B1 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is issuing this AD to address the unsafe condition on these products.
2026-16567, Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330-243, A330-243F, A330-341, A330-342, A330- 343, A330-841, and A330-941 airplanes; and Model A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, and A340-642 airplanes. This proposed AD was prompted by reports of leaks on closed fuel low pressure shut-off valves (LPSOVs). This proposed AD would require repetitive leak checks of certain fuel LPSOVs and replacement of an affected part if any discrepancy is detected. This proposed AD would also allow the installation of an affected part under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
2026-16502, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2025-26-03, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000- CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. AD 2025-26-03 requires repetitive borescope inspections (BSIs) of the high-pressure compressor (HPC) rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. AD 2025-26-03 also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. Since the FAA issued AD 2025-26-03, RRD published updated service material with a revised bolting arrangement at the HPC rotor shaft to high-pressure turbine (HPT) rotor disc interface to address the unsafe condition. This proposed AD would require repetitive BSIs of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This proposed AD would also allow an alternative method of complying with BSIs if certain actions are accomplished, and require modification of the bolting arrangement as a terminating action for the repetitive BSIs. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2025-20788, Assistance to Foreign Atomic Energy Activities
The Department of Energy just added the Philippines and Singapore to the list of countries allowed to receive U.S. nuclear technology and help. This change starts November 24, 2025, making it easier and faster for these countries to get support without extra paperwork. If you work with nuclear exports or foreign atomic energy, this update affects you and could speed up your projects!
Next: 2025-20825, Grants for Certified States and Indian Tribes
This update clears out old, unused money rules from the grant process for certified States and Indian Tribes involved in mining cleanup. It makes sure only current, real funds get counted starting January 23, 2026, so everyone knows exactly what cash is available. If anyone has big concerns, they can speak up by December 24, 2025, before the changes take effect.