Airbus Planes Get FAA's Fuselage Fix-It Directive
Published Date: 11/28/2025
Rule
Summary
The FAA is updating safety rules for certain Airbus airplanes, adding more models and new checks to keep them safe. If you own or operate these planes, you’ll need to follow the new inspection and repair steps starting January 2, 2026. These changes help prevent problems with the airplane’s fuselage and keep everyone flying worry-free, with no surprise costs announced yet.
Analyzed Economic Effects
5 provisions identified: 1 benefits, 4 costs, 0 mixed.
Mandatory inspections for listed Airbus
If you own or operate the Airbus models listed in EASA AD 2024-0217 (various A318, A319, A320, and A321 CEO and NEO variants), you must perform repetitive special detailed inspections of the double joggle areas at frame 16 and frame 20 and do any required repairs. These inspection and repair actions are required starting January 2, 2026, and must be done in accordance with EASA AD 2024-0217 as incorporated by reference.
FAA cost estimates for compliance
The FAA estimates this AD affects 1,755 U.S.-registered airplanes. The FAA estimates required actions cost up to $4,675 per airplane (up to 55 work-hours at $85/hour), for a U.S. fleet cost up to $8,204,625; an optional modification is estimated at $6,724 per airplane (60 work-hours at $85/hour plus $1,624 parts).
Repairs must be done before further flight
If inspections find any cracking, operators must repair the cracking before further flight using a method approved by the FAA Manager, EASA, or Airbus's EASA Design Organization Approval. The AD also clarifies that AD-required inspections must be performed by personnel qualified under 14 CFR 43.3 (the operator is responsible for compliance).
NEO models and post-repair rules added
The AD adds Airbus NEO airplane models (A318/A320/A321 NEO variants listed in EASA AD 2024-0217) to the applicability and adds special requirements for airplanes that were repaired after accomplishing ALI tasks 531153-02 or 531155-02. Those added applicability and post-repair requirements are part of the AD effective January 2, 2026.
Completing AD can terminate some ALI tasks
For the airplanes identified in this AD, accomplishing the AD's required actions terminates ALI tasks 531153-02-1 and 531155-02-1 as required by paragraph (n) of AD 2025-03-06. This termination applies only to the airplanes listed in paragraph (c) of this AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16803, Notice of Availability, Notice of Public Comment Period and Request for Comment on the Draft Environmental Assessment for Reditus Space ENOS Reentries in the Gulf of America
In accordance with the National Environmental Policy Act of 1969, as amended (NEPA) and FAA Order 1050.1G, FAA National Environmental Policy Act Implementing Procedures, the FAA is announcing the availability of and requesting comment on the Draft Environmental Assessment for Reditus Space ENOS Reentries in the Gulf of America (Draft EA).
2026-16795, Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737 -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of nuisance stick shaker activation while accelerating to cruise speed at the top of a climb due to frozen angle of airflow (AOA) sensor vanes. This proposed AD would require installing new external case heaters (ECHs) on the left and right AOA sensors, performing repetitive functional tests and applicable corrective actions, and accomplishing applicable concurrent actions. The FAA is proposing this AD to address the unsafe condition on these products.
2026-16804, Establishment of Class E Airspace; Trading Bay Production Airport, Trading Bay, AK
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Trading Bay Production Airport, Trading Bay, AK. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.
Previous / Next Documents
Previous: 2025-21474, Airworthiness Directives; The Boeing Company Airplanes
If you fly or work with Boeing 757-200 planes, listen up! The FAA is updating safety rules to keep the Captain’s and First Officer’s seats from moving on their own. Starting January 2, 2026, new inspections will check more seat parts to make sure everything stays safe—no surprise seat moves allowed! This means some extra checks but no big money hits, just safer flights.
Next: 2025-21476, Airworthiness Directives; Airbus SAS Airplanes
If you own or operate certain Airbus A319, A320, or A321 planes, the FAA has updated safety rules to keep you flying safe. They’re adding regular checks for cracks in key parts of the plane and fixing them if needed, starting January 2, 2026. These inspections might cost some time and money but will help prevent bigger problems down the runway.