Pennsylvania Coal Company Files for Mine Safety Rule Change
Published Date: 1/12/2026
Notice
Summary
Consol Pennsylvania Coal Company wants to change some safety rules at their mine to use a different method that keeps workers just as safe. This petition asks the Mine Safety and Health Administration to approve the change, which could affect how safety checks are done and might save time or money. Everyone has until February 11, 2026, to share their thoughts before a decision is made.
Analyzed Economic Effects
5 provisions identified: 4 benefits, 1 costs, 0 mixed.
Request to Use Specific Diagnostic Devices
Consol Pennsylvania Coal Company asked MSHA to allow use of specific battery-powered, non-permissible testing and diagnostic devices (including Emerson AMS 2140; Bentley Nevada vb7, Scout 100 EX, Commtest Scout 140/VBX/Scout units) and other devices (laptops, oscilloscopes, cable fault detectors, infrared temperature devices, ultrasonic devices, electronic tachometers, etc.) within 150 feet of pillar workings or longwall faces under 30 CFR 75.1002(a). The petition says using these devices could change how safety checks are done and might save time or money at the Harvey Mine in Greene County, Pennsylvania.
1% Methane Limit and Continuous Monitoring
The petition would require a qualified person to continuously monitor for methane immediately before and during use of non-permissible electronic testing equipment, and non-permissible equipment must not be used if methane is detected at or above 1%. If one percent or more methane is detected while the equipment is in use, the equipment must be de-energized immediately and withdrawn to more than 150 feet from pillar workings or outby the longwall faces.
Production Pause During Troubleshooting
Under the proposed alternative method, coal production in the affected section must cease except for the time necessary to troubleshoot under actual mining conditions. Coal may remain in or on equipment to allow testing under load.
Pre-use Exams and Written Records Required
All non-permissible testing and diagnostic equipment used within 150 feet of pillar workings or longwall faces must be examined by a qualified person (per 30 CFR 75.153) before use, and the examination results must be recorded in the weekly examination book and made available to MSHA and miners at the mine.
Posting and Training Requirements
The petitioner must post the petition in unobstructed locations on bulletin boards at all applicable mines for at least 60 consecutive days and include the petition's listed terms and conditions in initial and annual refresher training required under the mine's approved Part 48 training plans.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-10456 — Department of Labor Federal Civil Penalties Inflation Adjustment Act Annual Adjustments for 2026
Good news for businesses and workers: the Department of Labor won’t raise any fines or penalties in 2026 because the usual inflation data wasn’t available. This means all civil penalties stay the same starting May 27, 2026. So, no surprise cost hikes this year—just steady rules and steady fees!
2026-10858 — Proposed Extension of Information Collection: Records of Tests and Examinations of Personnel Hoisting Equipment
The Mine Safety and Health Administration wants to keep collecting records about tests and checks on hoisting equipment used to lift miners safely. This proposal asks for public feedback by July 31, 2026, to make sure the paperwork is clear and not too much work. If you work with mining equipment, this affects you, but no new costs or big changes are planned—just a smooth extension of current rules.
2026-10859 — Proposed Extension of Information Collection: Representative of Miners, Notification of Legal Identity, and Notification of Commencement of Operations and Closing of Mines
The Mine Safety and Health Administration wants to keep collecting info from mine operators and miner reps about who’s in charge, when mines open or close, and legal details. This helps keep mines safe and organized without adding extra paperwork. If you’re involved with mines, you can share your thoughts by July 31, 2026—no extra fees or big changes, just a smooth info update!
2026-09115 — Proposed Extension of Information Collection: Qualification and Certification Program Request for MSHA Individual Identification Number (MIIN)
The Mine Safety and Health Administration (MSHA) wants to keep collecting info for their Qualification and Certification Program, which helps track miners with a special ID number called MIIN. This affects miners and companies who need these IDs to work safely and legally. They’re asking for public feedback by July 7, 2026, and there’s no new cost or big changes—just a smooth extension to keep things running.
2026-06584 — Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection; Delay of Effective Date of Conforming Amendments
Miners working with metal and nonmetal materials won’t see new silica dust rules take effect on April 8, 2026, because a court has paused the changes. This delay means current safety rules stay in place while the court reviews the case, giving mining companies more time to prepare. No new costs or changes will happen until the court lifts the hold.
2026-06513 — Affirmative Decisions on Petitions for Modification Granted in Whole or in Part
Mine operators and miner reps asked MSHA to approve new ways to keep mines safe between July and December 2025. MSHA reviewed these requests and said yes to some, as long as safety stays top-notch or improves. These changes might affect how mines work but won’t cut corners on safety, and you can check the full details online or in person.
Previous / Next Documents
Previous: 2026-00349 — Petition for Modification of Application of Existing Mandatory Safety Standards
Consol Pennsylvania Coal Company asked to change some mine safety rules to use a different method that keeps miners just as safe. This change could affect how safety standards apply at their mines, and everyone has until February 11, 2026, to share their thoughts. The goal? Keep miners safe while possibly making safety checks easier or more efficient, without extra costs.
Next: 2026-00351 — Petition for Modification of Application of Existing Mandatory Safety Standards
Greenbrier Smokeless Coal Mining wants to change some safety rules at their mine to use a different method that keeps workers just as safe. This petition affects miners at their West Virginia site and could save the company time or money while still protecting everyone. Comments on this request must be sent by February 11, 2026, so don’t miss your chance to weigh in!