FAA Fixes Typo in Boeing 737 Safety Rule Paperwork
Published Date: 1/16/2026
Proposed Rule
Summary
The FAA fixed a mix-up in the paperwork for a safety rule about certain Boeing 737 airplanes. This rule affects models 737-600 through 737-900ER and keeps the original safety checks and deadlines the same. If you want to share your thoughts, you have until February 23, 2026, to comment—no extra costs or changes to the original plan.
Analyzed Economic Effects
3 provisions identified: 2 benefits, 1 costs, 0 mixed.
Mandatory inspections and repairs for 737s
If you operate or maintain Boeing Model 737-600, -700, -700C, -800, -900, or -900ER airplanes, you must follow the inspection and on-condition repair actions in Boeing Alert Requirements Bulletin 737-55A1104 RB, dated June 12, 2025. The actions include measuring freeplay of the left and right horizontal stabilizer pivot hinges and the jackscrew, determining total stabilizer freeplay, repeating measurements as required, and replacing or repairing any worn parts at the times specified in the bulletin. The correction only fixes the docket number to Docket No. FAA-2025-5403 and does not change the original compliance times or required actions.
Reduces risk of stabilizer flutter
The rule responds to reports of pitch oscillations from excessive horizontal stabilizer freeplay that could lead to a flutter event and possible loss of control of the airplane. By requiring the inspections and on-condition repairs in the June 12, 2025 Boeing bulletin, the FAA aims to reduce the risk of those dangerous flight events for affected 737 models.
Alternative compliance request option
Operators may request an Alternative Method of Compliance (AMOC) to meet this AD if approved by the Manager, AIR-520, Continued Operational Safety Branch, FAA, or by an authorized Boeing Organization Designation Authorization (ODA). To use an AMOC, follow the procedures in 14 CFR 39.19 and notify your principal inspector or the responsible Flight Standards Office before using any approved AMOC.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-00782, Determination of Attainment by the Attainment Date; 1997 Ozone Standards; California; Coachella Valley
The EPA says Coachella Valley in Riverside County met the 1997 ozone pollution standards by June 15, 2025, thanks to cleaner air from 2022 to 2024. This means the area is on track to keep the air healthier, and folks living or working there can breathe a little easier. The EPA is asking for public comments until February 17, 2026, before making this official.
Next: 2026-00875, Wyoming Regulatory Program
Wyoming wants to update its mining rules to match changes made between 2017 and 2021, especially about how contested case hearings work. These updates affect mining companies and state agencies, aiming to keep things clear and fair. You can share your thoughts by February 17, 2026, and there might be a public hearing on February 10 if enough people ask for it.