FAA Renews Airport Construction Notification Forms
Published Date: 1/20/2026
Notice
Summary
The FAA is asking for your thoughts on renewing forms that builders must fill out before and after constructing or changing tall structures near airports. This helps keep our skies safe by checking if new buildings might mess with airplanes. If you’re involved in construction near airports, get ready to share your feedback by March 23, 2026—no extra fees, just a little paperwork to keep flying safe!
Analyzed Economic Effects
1 provisions identified: 0 benefits, 1 costs, 0 mixed.
Builders must notify FAA before/after tall work
If you propose construction or alteration that may affect navigable airspace, federal law (49 U.S.C. 44718) and FAA rules (14 CFR 77) require you to file FAA Form 7460-1 before the project and FAA Form 7460-2 to report actual construction progress. The agency estimates about 85,000 respondents will file these occasional notices, with an average burden of about 15 minutes per response and a total annual burden of 55,058 hours; the FAA is accepting public comments on renewing this collection through March 23, 2026 (OMB Control Number 2120-0001).
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16970, Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Flight Attendant Fatigue Risk Management Plan
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 18, 2026. The collection involves submission of Fatigue Risk Management Plans (FRMP) for flight attendants of certificate holders operating under Title 14 of the Code of Federal Regulations (CFR) part 121. The certificate holders will submit the information to be collected to the FAA for review and acceptance as required by the FAA Reauthorization Act of 2018. ---------------------------------------------------------------------------
2026-16956, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2022-11-15, which applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent7000-72 and Trent7000-72C engines. AD 2022-11-15 requires initial and repetitive on-wing borescope inspections (BSIs) of the high-pressure turbine (HPT) blades to detect axial cracking and, depending on the results of the inspections, replacement of the HPT blade set. Since the FAA issued AD 2022-11-15, RRD issued updated service material providing improved instructions for inspection of the HPT blades, removing the reduced life limit for affected HPT blades, and revising the HPT blade limits for axial cracking. This proposed AD would continue to require initial and repetitive on-wing BSIs of the HPT blades to detect axial cracking and, depending on the results of the inspections, replacement of the HPT blade set. This proposed AD would also remove the reduced life limit for affected HPT blades. The FAA is proposing this AD to address the unsafe condition on these products.
2026-16961, Airworthiness Directives; Dassault Aviation Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2025-13-11, which applies to all Dassault Aviation Model FALCON 7X airplanes. AD 2025-13-11 requires replacing the affected spoiler electrical units (SPECUs) and prohibits the installation of affected parts. Since the FAA issued AD 2025-13-11, it was determined that additional SPECUs are subject to the unsafe condition. This proposed AD would continue to require the actions in AD 2025-13-11 and would require replacing additional SPECUs. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-00885, Agency Information Collection Activities: Submission to the Office of Management and Budget for Review and Approval; Comment Request; EIB 92-51, Application for Special Buyer Credit Limit (SBCL) Under Multi-Buyer Export Credit Insurance Policies
The Export-Import Bank is asking for feedback on a form that helps U.S. small businesses get special credit limits when selling goods overseas. This update aims to keep paperwork simple while making sure foreign buyers can pay back. Comments are due by March 23, 2026, so exporters should act fast to have their say!
Next: 2026-00887, Certain Dental Burs and Kits Thereof; Notice of Institution of Investigation
The U.S. International Trade Commission is starting an investigation into certain dental burs and kits that might be breaking patent and trademark rules. This affects companies importing or selling these dental tools in the U.S., especially Huwais IP Holding LLC and Versah, LLC. If the claims are true, some products could be blocked from entering the market soon, impacting sales and competition.