Helicopter Tail Woes: FAA Mandates Inspections for Cracked Rotors
Published Date: 1/22/2026
Rule
Summary
If you own or fly Airbus Helicopters Deutschland GmbH EC135 models, listen up! The FAA found some tail rotor parts might be cracked or bent, so they’re requiring inspections and fixes starting February 26, 2026. You can’t install certain parts unless you follow new safety steps, helping keep everyone flying safe without surprise costs if you act on time.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Mandatory tail-rotor inspections for EC135s
If you operate an Airbus Helicopters Deutschland EC135 (listed EC135P1, P2, P2+, P3, T1, T2, T2+, T3 and variants), you must inspect the axial displacement of the tail rotor drive shaft and take corrective actions beginning February 26, 2026. The FAA estimates inspecting both flexible couplings takes 8 work-hours ($85/hour) for $680 per helicopter and $46,920 for the U.S. fleet of 69 helicopters; replacing both couplings is estimated at $4,270 per helicopter (2 work-hours plus $4,100 parts), replacing one coupling $2,135, and correcting axial displacement $425 (5 work-hours).
Special flight permits are prohibited
Starting February 26, 2026, special flight permits are prohibited for the affected EC135 helicopters under this AD, meaning operators cannot use special permits to fly helicopters that have the unsafe condition without complying first.
No installation without required procedures
From February 26, 2026, you may not install a tail rotor drive shaft on the affected EC135 helicopters unless you follow the specific procedures referenced in the AD (instructions in the incorporated EASA service material and the AD exceptions).
No parts-return or reporting requirement
Although the EASA material requests submitting information and sending parts to the manufacturer, this FAA AD explicitly does NOT require reporting or returning parts, reducing paperwork and shipment obligations for U.S. operators as of February 26, 2026.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-01172, Amendment of Class D and Class E4 Airspace Over Wilkes-Barre, PA
The FAA is updating the airspace rules around Wilkes-Barre/Scranton International Airport to better protect flights using instruments, making sure planes stay safe and sound. They’re also fixing the airport’s location info and clarifying tower operation hours. These changes kick in on May 14, 2026, with no extra costs for pilots or travelers.
Next: 2026-01182, Airworthiness Directives; PZL-Swidnik S.A. Helicopters
If you own or fly a PZL-Swidnik W-3A helicopter, listen up! The FAA found rust on some main rotor blade bolts and now requires regular checks, repairs, or replacements to keep things safe. These rules kick in February 6, 2026, so get ready to inspect, report, and keep your chopper flying smoothly without breaking the bank.