FAA Mandates Crack Checks on Helicopter Brakes and Pedals for Safety
Published Date: 1/26/2026
Proposed Rule
Summary
If you own or operate Leonardo AB139, AW139, or AW189 helicopters, listen up! The FAA wants you to regularly check certain brake and pedal parts for cracks to keep flying safe. You’ll need to act fast once this rule is final, and skipping inspections or installing the wrong parts won’t fly—so get ready to keep those helicopters in top shape without breaking the bank.
Analyzed Economic Effects
4 provisions identified: 2 benefits, 2 costs, 0 mixed.
Mandatory repetitive brake/pedal inspections
If you own or operate Leonardo Model AB139, AW139, or AW189 helicopters, the FAA would require repetitive inspections of the left-hand (LH) and right-hand (RH) tube assemblies (AB139/AW139) or pedal shaft assemblies (AW189) and corrective actions as specified in EASA AD 2025-0163, dated July 30, 2025. These inspections are intended to detect cracks that could lead to structural failure of the pedal assembly and reduced control around the yaw axis.
Estimated inspection and repair costs
The FAA estimates the inspection will take 2 work-hours at $85/hour, costing $170 per helicopter and affecting 153 U.S.-registered helicopters for a total estimated inspection cost of $26,010. If replacements are required, the FAA estimates an on-condition replacement cost of $3,466 per assembly, plus other on-condition actions like manufacturing/installing a placard for $85 and revising the rotorcraft flight manual for $85.
Parts installation restrictions
The proposed AD would prohibit installing certain affected LH/RH tube or pedal shaft parts on AB139, AW139, and AW189 helicopters unless the installation meets the requirements specified in EASA AD 2025-0163. That means operators and maintenance personnel cannot place those parts back into service unless they satisfy the AD's serviceability or other required conditions.
Pilot allowed to revise flight manual
The proposed AD explicitly permits an owner/operator holding at least a private pilot certificate to revise the existing rotorcraft flight manual (RFM) by inserting Appendix 1 of EASA AD 2025-0163 and to enter compliance into the helicopter maintenance records under 14 CFR 43.9(a) and 91.417(a)(2)(v). The FAA notes this RFM revision may be performed by either a pilot or a mechanic.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-11875 — Petition for Exemption; Summary of Petition Received; NetJets Aviation, Inc.
NetJets Aviation, a big private jet company, asked the FAA to let them skip some usual flight rules. This could change how they operate their planes, and the public has until July 2, 2026, to share their thoughts. No money changes are mentioned yet, but this could speed up or simplify some flights for NetJets.
2026-11861 — Establishment of Class E Airspace; Freer, TX
The FAA is creating new Class E airspace around Silverhorn Ranch Airport in Freer, TX, to support safer flying with new instrument flight rules. This change starts on October 29, 2026, and mainly affects pilots flying in and out of this airport. No extra costs for the public, just smoother and safer skies for everyone!
2026-11904 — Establishment of Class E Airspace; Mullin, TX
The FAA is creating new Class E airspace around Smoky Bend Ranch Airport in Mullin, TX to help pilots fly safely using instruments, especially in bad weather. This change starts on October 29, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just smoother and safer skies for everyone!
2026-11792 — Modification of Class E Airspace, Omak Airport, Omak, WA
The FAA is changing the Class E airspace around Omak Airport in Washington to make flying safer and smoother for pilots using instruments. This update starts on September 3, 2026, and mainly affects pilots flying under instrument flight rules (IFR). No extra costs for the public, just better airspace management to keep flights on track!
2026-11730 — Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Starting June 11, 2026, the FAA is updating how pilots approach and take off from certain airports to keep flights safe and smooth. These changes affect pilots and airports by adjusting flight paths and safety rules based on new tech and obstacles. No big costs here—just smarter, safer skies for everyone flying under instrument rules!
Previous / Next Documents
Previous: 2026-01414 — Endangered and Threatened Wildlife and Plants; 90-Day Findings for 10 Species
The U.S. Fish and Wildlife Service is reviewing 10 species to see if they need protection as endangered or threatened. This review started on January 26, 2026, and could lead to new rules that help save these animals and plants. Scientists and the public are invited to share info to make sure the decisions are spot-on, with final findings expected in about a year.
Next: 2026-01464 — Airworthiness Directives; Airbus Helicopters Deutschland GmbH (AHD) Helicopters
The FAA wants to fix a safety issue with certain Airbus Helicopters Deutschland models MBB-BK 117 C-2 and D-2. Some hooks might get damaged if tightened too much, so the FAA proposes changing or replacing these parts to keep flights safe. Helicopter owners need to act before March 12, 2026, or risk grounding their aircraft, but the fix helps avoid costly problems down the line.