Bolt Check Alert: FAA Targets Regional Jet Safety Upgrades
Published Date: 1/27/2026
Proposed Rule
Summary
The FAA wants to update safety rules for certain MHI RJ Aviation ULC regional jets (formerly Bombardier models) to keep them flying safely. They’re asking owners to keep checking bolts regularly and now replace some hardware to fix a safety issue. Comments are open until March 13, 2026, and these changes might cost some time and money but will keep flights safer.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Mandatory H‑Stab Hardware Replacement
If you operate the listed MHI RJ (formerly Bombardier) regional jets, the FAA proposes to require replacing the horizontal stabilizer (H‑Stab) anti‑yaw steady fitting block hardware. Transport Canada required that replacement within 6,600 flight hours or 6 years (whichever occurs first), and the FAA proposes to mandate that action to address loose or missing bolts that can lead to loss of the horizontal stabilizer.
Repetitive Torque Checks Every 2,200 Hours
The proposed AD continues the requirement for repetitive torque checks of the H‑Stab anti‑yaw steady fitting block bolts at intervals not to exceed 2,200 flight hours. The FAA estimates the retained inspection action can take up to 6 work‑hours at $85 per hour (up to $510 per airplane) each time it is performed.
Estimated Fleet Compliance Costs
The FAA estimates this proposed AD would affect 597 U.S. airplanes. Estimated costs: retained actions up to $510 per airplane (total up to $304,470 on U.S. operators), new proposed actions $622 per airplane (7 work‑hours at $85/hr plus $27 parts; total $371,334 on U.S. operators), and any on‑condition action up to $113 per airplane (1 work‑hour at $85 plus up to $28 parts).
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-08943 — Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-10293 — Prohibition of Remote Dispatching
The FAA wants to stop airplane dispatchers from working remotely, except in emergencies when the main center is down. This change affects all domestic, flag, and supplemental airline operators and aims to keep flight safety tight and clear. Comments on this rule are open until July 21, 2026, so airlines and dispatchers should get ready for a new way of working that could shake up their routines.
2026-10270 — Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is requiring certain Embraer ERJ 190-100 ECJ airplanes to get a close check on their overheat detection sensors because some parts might not work right. If problems are found, those parts must be replaced, and no faulty parts can be installed anymore. This rule kicks in on June 26, 2026, helping keep flights safe without breaking the bank.
2026-10256 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus EC130T2 helicopters, the FAA wants you to install a new fix on the tail rotor drive shaft and keep checking its vibration regularly. This update replaces old rules and stops certain parts from being used unless they meet new safety standards. You’ve got until July 6, 2026, to share your thoughts, and while this might cost some bucks, it’s all about keeping flights safe and smooth.
2026-10271 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is making sure certain Bombardier BD-700 airplanes are safe by checking and fixing bolts on the baggage door that might have been tightened wrong. Owners need to inspect and adjust or replace these bolts by June 26, 2026, to keep flying safely. This fix helps avoid any door problems and keeps passengers secure without breaking the bank.
2026-10272 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330 planes, listen up! The FAA found a problem where a backup fuel pump might fail quietly, trapping fuel that can’t be used. Starting June 8, 2026, airlines must regularly check these pumps and fix any issues to keep flights safe—no big wallet hits expected, just smart safety moves.
Previous / Next Documents
Previous: 2026-01464 — Airworthiness Directives; Airbus Helicopters Deutschland GmbH (AHD) Helicopters
The FAA wants to fix a safety issue with certain Airbus Helicopters Deutschland models MBB-BK 117 C-2 and D-2. Some hooks might get damaged if tightened too much, so the FAA proposes changing or replacing these parts to keep flights safe. Helicopter owners need to act before March 12, 2026, or risk grounding their aircraft, but the fix helps avoid costly problems down the line.
Next: 2026-01497 — Notice of Availability and Request for Comment: Revision to the Voluntary Standard for Gates and Enclosures
The Consumer Product Safety Commission wants your thoughts on updates to the safety rules for gates and enclosures, which help keep kids safe. These changes come from a new version of a voluntary safety standard, and the Commission is checking if it makes gates even safer. If you make, sell, or use these products, now’s the time to speak up before February 10, 2026—no extra costs yet, just your feedback!