Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Helicopter Air Ambulance, Commercial Helicopter, and Part 91 Helicopter Operations
Published Date: 1/29/2026
Notice
Summary
The FAA wants to keep collecting important info from helicopter air ambulance, commercial, and private helicopter operators to help keep everyone safe. They’re asking for public feedback by March 30, 2026, to make sure the process is clear and not too much work. This renewal supports safety goals without adding new costs or big changes for helicopter folks.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Continued Data Collection for Helicopter Ops
The FAA will continue collecting required information from Helicopter Air Ambulance (Part 135), commercial helicopter (Part 135), and Part 91 helicopter operators. The paperwork burden is estimated at an average of 7 minutes per response and a total annual burden of 115,979 hours; some submissions are one-time and some are required per flight.
FAA Use of Collected Data for Compliance
The FAA will use the information it collects to check whether operators follow safety rules in 14 CFR parts 91 and 135 and to determine eligibility for operating certification. The agency may also use the data to take enforcement action against operators who violate the rules.
Collection Supports FAA Safety Goal
The information collection is intended to support the Department of Transportation's safety goal to promote public health and safety by working toward the elimination of transportation-related deaths and injuries. The FAA says it will use the data to improve oversight and safety for helicopter operations.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-17551, Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2024-25- 06, which applied to all Airbus SAS Model A318 and A320 series airplanes; and Model A319-111, -112, -113, -114, -115, -131, -132, - 133, -151N, -153N, and -171N airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, - 251NX, -252NX, -253NX, -271NX, -272NX, and -253NY airplanes. AD 2024- 25-06 required repetitive inspections of the main landing gear (MLG) door actuators and, depending on findings, accomplishment of applicable corrective actions, and prohibited the installation of affected parts. Since the FAA issued AD 2024-05-06, the FAA determined that replacing the MLG door actuators is necessary to address the unsafe condition, and the applicability and definition of an affected part must be expanded. This AD continues to require the actions in AD 2024-25-06, requires replacing affected parts with serviceable parts, and expands the applicability and definition of an affected part. The FAA is issuing this AD to address the unsafe condition on these products.
2026-17552, Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-211, -212, -214, -216, -231, -232, and - 233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a fatigue test that identified cracks in the forward and aft upper corner of the bulk cargo door. This AD requires a rototest inspection for cracks and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-01798, Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Small Unmanned Aircraft Registration System
The FAA wants to keep collecting basic info to register small drones, making sure every drone pilot is accountable and easy to find if needed. This renewal won’t add new costs or big changes but keeps the system running smoothly. If you fly a small drone, you can update or cancel your registration, and the FAA wants your thoughts by March 2, 2026.
Next: 2026-01800, Submission for Office of Management and Budget Review; Provision of Child Support Services in IV-D Cases Under the Hague Child Support Convention; Federally Approved Forms
The government is asking to keep using the same child support forms for another 3 years, helping states handle international child support cases under the Hague Convention. This affects state agencies working on child support and keeps the process smooth and consistent worldwide. No changes or extra costs are planned, but public comments are open until March 2, 2026.