Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
Published Date: 2/2/2026
Rule
Summary
The FAA is updating safety rules for Embraer ERJ 190-300 and -400 airplanes because their flight manuals had a mistake in the takeoff calculations. Pilots must update their manuals with the new, corrected version by February 17, 2026, to keep flying safely. This fix helps avoid risks without big costs but must be done on time to keep planes in the sky.
Analyzed Economic Effects
3 provisions identified: 2 benefits, 1 costs, 0 mixed.
Fix AFM Takeoff Calculations
If you operate an Embraer ERJ 190-300 or ERJ 190-400 airplane, you must revise the airplane flight manual to incorporate CAFM version 2.0 (or later) by February 17, 2026. This corrects an inconsistency in the takeoff calculation module that could otherwise cause the airplane to be unable to overcome obstacles in the first takeoff segment in the event of an engine failure.
Low One-Time Compliance Cost
If an affected Embraer airplane is imported and placed on the U.S. Register in the future, the FAA estimates the required AFM revision will take 1 work-hour at $85 total per airplane. That $85 estimate is the FAA's projected cost per product to accomplish the required action.
No Immediate U.S. Impact
The FAA states there are currently no U.S.-registered Embraer ERJ 190-300 or -400 airplanes, so there are no immediate compliance costs for U.S. operators; the AD nevertheless becomes effective February 17, 2026 if an affected airplane is later registered. The FAA will accept comments on this AD through March 19, 2026.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-02096, Airworthiness Directives; The Boeing Company Airplanes
If you own or operate Boeing 787 airplanes, listen up! The FAA is updating safety rules to fix leaks under lavatory sinks by requiring a new, improved faucet control module that stops leaks for good. Starting March 9, 2026, you’ll need to replace the old parts, keep testing for leaks, and install moisture devices—helping save money and keep flights safe and dry.
Next: 2026-02098, Airworthiness Directives; Airbus SAS Airplanes
If you fly or fix Airbus A350-941 and -1041 planes, listen up! The FAA says some flight control parts can wear out and cause trouble, so they must be swapped out before they get too old. This new rule kicks in on March 9, 2026, to keep flights safe without breaking the bank.